Низкорамный полуприцеп

FAYMONVILLE MAX Trailer MAX110 Semi-Tieflader

You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website.
Excerpt from the equipment list. Complete equipment list available upon request.

Gooseneck
* Gooseneck with beveled front corners at approximately 45° and a rear bevel of approximately 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approximately 30 mm thick

Extendable platform
* with rear bevel of approximately 1,000 mm x 8°
* 5 pairs of lashing rings that fold outwards (LC 5,000 daN)
* 3 pairs of lashing rings that fold outwards (LC 10,000 daN)
* 1 pair of lashing rings, lying horizontally at the front of the platform (LC 10,000 daN)
* Recesses in the outer frame of the platform for attaching tension straps (LC 2,000 daN)
* Hardwood flooring, approximately 48 mm thick, with non-slip steel plate flooring over the axles

Axles
* BPW axles and suspension
* 1st axle rigid, all other axles hydro-mechanically forced-steered
* Technical axle load: 12,000 kg each
* Air suspension with lifting and lowering valve
* Axle tool kit

Nwodpfx Aozk S Dmenuek
* Tires
* 245/70 R 17.5 3PMSF
* Load index (146/146 F)
* TPMS: TPMS tire pressure monitoring system according to ECE R 141

Kingpin
* JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load)

Braking system
* in accordance with EU regulations with EBS-E (4S3M)

Paint finish
* Complete steel construction automatically blasted with a blasting wheel system after welding
* Second blasting with corundum for optimal adhesion of the coating system
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection
* Final coating with 2 layers of 2K topcoat
* solid color in RAL 3002 carmine red according to the RAL 841GL system
* Rims in silver gray. Rear section metallized and painted in RAL 9010 (pure white)
* Metallic paint not possible
* Paint structure tested in the salt spray test according to ISO 9227-NSS
* Sealing of cavities with special wax

Steel construction
* made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)

Electrical system
* in accordance with EU regulations

Lighting
* 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the turn signal
* ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pole sockets
* Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098

Incl. the following additional equipment
* 2-inch kingpin
* One galvanized steel front wall, approximately 400 mm high
* Electro-hydraulic unit (± 45kg)
* Steering from the front and rear via cable remote control, operated via push buttons, with single-axle steering (without installation in the central beam)
* 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) (± 3kg)
* On the gooseneck, aluminum side boards and rear wall, pluggable, approximately 2,440 x 400 mm (L x H)
* The rear galvanized plug-in stakes are removable. (Length of the structure approximately 2,560 mm) (± 46kg)
* A galvanized toolbox, integrated in the beveled gooseneck (± 47kg)
* 3 pairs of WADER container pockets in the platform for a 20' (30?) or a 40? container (± 30kg)
* 6 pairs of stake pockets for plug-in stakes, approximately 100 x 50 mm, in the outer frame of the platform (± 18kg)
* Extensions, galvanized, extendable by app

Объявление было переведено автоматически. Возможны ошибки перевода.