открытый полуприцеп

Fliegl 3-Achs Jumbo Sattelauflieger Plateau

Chassis, Semi-trailer, Logistics
Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin
Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps
24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support
Free support leg angle or free swivel radius to the rear, approx. 1920 mm
2 support wedges with holder
Aluminum side impact protection
Steel underrun protection
Partial wheel covers in front of and behind each axle
Kodpjza A Txefx Abuonb
Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations
1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included)
Axles + Suspension
SAF drum brake axles
"Axle/chassis laser-aligned" to reduce tire wear and fuel consumption
Air suspension
1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h)
Axle lift below the recommended ride height, therefore no guarantee for tire damage
Braking System
2-line compressed air brake system
Color-coded line routing for easy maintenance
Spring brake parking brake
2 non-interchangeable coupling heads at the front, without connecting cable
EBS, electronic brake system with EBS socket at the front, without connecting cable
Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS!
With raising and lowering valve
Vehicle - Driving Stability System
Wheels and Tires
235/75 R17.5, brand according to the manufacturer's choice
Steel rims, factory silver
Electrical System
24 Volt, multi-chamber lights, yellow LED lighting on the sides
2 white position lights at the front
2 white/red outline lights at the rear
2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable
Floor
Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg
Front wall / corner posts
25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design
Country of Approval / Signage
Germany
With DEKRA inspection and certificate (according to §13 EC - FGV)
24/7 service hotline
Prepared for single-row license plate holder
Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear
Paint
Frame DB 7350 Novagrau
Front corner posts: hot-dip galvanized
Front wall: aluminum

Объявление было переведено автоматически. Возможны ошибки перевода.