Низкорамный полуприцеп

KÄSSBOHRER K.SLA_RJ 3 / 1N 18/24 Jumbo Tieflader ausziehbar

Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Jumbo Low Loader | Extendable | Wheel Well | Ramps | 3 Axles

Low neck height, small tires!
770 mm loading height

Manufacturer: Kässbohrer
Model: K.SLA_RJ 3 / 1N ? 18 / 24
Vehicle type: Extendable jumbo low loader with wheel wells
Country of registration: Germany
Year of manufacture: 2026
Color: RAL 3020 Traffic Red

----Technical Data
Dimensions*
* Overall length: 13,190 mm
* Platform length: 9,240 mm
* Extension: 3,500 mm
* Gooseneck length: 3,950 mm
* Platform height: 770 mm
* Saddle height: 1,150 mm
* Overall width: 2,550 mm + 600 mm side extension
* Wheelbase: 7,800 mm
* Axle spacing: 2,260 mm
* Locking position: 500 mm
* Swing door at rear: 2,300 mm

----Weights
* Unladen weight: approx. 12,556 kg
* Permissible total weight (80 km/h): 48,000 kg
* Permissible total weight (60 km/h): 52,800 kg
* Axle load: 24,000 kg
* Axle carrying capacity: 8,000 kg per axle
* King pin load capacity: 15,000 kg

----Chassis / Axles
* 3 BPW axles
* Air suspension
* 2 rigid axles at the front
* 1 trailing axle at the rear
* Lift axle on the 1st axle (load-dependent)
* Automatic axle lift control from tractor unit
* Air suspension with load gauge
* ECAS electronic air suspension system

Cgodpfjyrkpxex Afcjp
----Brake system / Electric
* WABCO EBS 4S/3M
* ABS
* RSS roll stability support
* Electro-pneumatic dual-circuit brake system
* Lighting according to ECE R48
* Aspöck lighting system
* Sockets:
* 24N (ISO 1185)
* 24S (ISO 3731)
* 15-pin ADR (ISO 12098)

----Wheels / Tires
* Tire size: 205/65 R17.5
* 12 wheels
* Steel rims
* M+S tires
* 3PMSF winter tires
* Tire pressure monitoring system
* Spare wheel holder on bulkhead

----Chassis / Body
* High-strength S700 MC steel frame
* 2" king pin (bolted)
* Gooseneck with 90° vertical corners
* Partial metallization Zn/Al corrosion protection
* 45 mm hardwood floor
* Checker plate over the wheels

----Loading Area / Extensions
* Side extension up to 300 mm
* 100x100 box-section mounts
* Galvanized steel extensions
* Hardwood planks (3 × 100 mm)
* Storage box for extension planks

----Wheel Well / Excavator Well
* Wheel well for vehicle transport
* Excavator well at rear
* Width: 750 mm
* Depth: 310 mm
* Length: 3,000 mm
* Wheel well bridges made of hardwood

----Ramps
* Foldable loading ramps
* Ramp capacity: 40 t
* Ramp length: 2,750 mm
* Ramp width: 850 mm
* Hydraulic sliding system
* Ramp floor made of hardwood
* Ramp securing with tension chain

----Load Security
Lashing points:
Gooseneck:
* 2 × 2 pieces 5 t
* 1 × 2 pieces 10 t
Platform outside:
* 3 × 2 pieces 5 t
* 4 × 2 pieces 10 t
Under outer frame:
* 2 × 2 pieces 8 t
Platform:
* 4 × 2 pieces 6 t
Further securing:
* 5 × 2 stake pockets
* 3 × 2 stake row pockets
* 8 × 2 removable stakes
* Container locks for 20 ft / 30 ft containers

----Equipment / Accessories
* Toolbox (700 × 400 × 360 mm)
* Rotating beacon
* Rear work light
* Extendable warning boards with LED
* Side marking tape
* Rear marking tape
* Wheel chocks
* Wabco Smartboard
* Connection cable (NATO socket)

For further information, please do not hesitate to contact us.

Объявление было переведено автоматически. Возможны ошибки перевода.