Полуприцеп с открытой бортовой платформой

Schwarzmüller RH 230 Plateau | hydr. zwangslenkenkt

LOCATION: 73230 Kirchheim unter Teck
-
3-AXLE BUILDING MATERIAL FLATBED SEMITRAILER RH230 – forced-steered
Vehicle ID No.: VAVJS1339PH522406
Mileage: 7,700 km
-
Weights
Gross weight (technical): 39 t
Axle aggregate load (technical): 27 t
Fifth wheel load (technical): 12 t

DIMENSIONS
Internal length approx. 13,500 mm
Internal width approx. 2,480 mm
Overall width max. 2,550 mm
Loading height front approx. 230 mm above ASH = approx. 1,360 mm
Unladen fifth wheel height approx. 1,130 mm

CHASSIS
- Welded steel frame construction
- Reinforced for 20 t point load over 4 m loading length
Psdpfexq S H Iex Anfjgk
- Frame height at front approx. 230 mm
- 2" interchangeable king pin
- Frame for unladen fifth wheel height approx. 1,120 mm – approx. 1,200 mm with air-suspended tractor unit
- Outer frame with 4 mm perforated plate, hole center spacing approx. 100 mm, elongated hole 50/30 mm, for lashing of 3.5 t per lashing point
- 10 pairs of 5 t lashing rings, recessed in floor, foldable, can also be folded outwards
- 8 pairs of square tube sockets with plug-in mounting for square tube stanchions 80x80 mm, both sides of outer frame
- 6 square tube sockets with plug-in mounts for 80x80 mm square tube stanchions, positioned transversely across the full width, max. pulling force 2,000 daN

AXLES
- BPW EcoDisc axles with disc brakes Ø430 mm (22.5" disc)
- Load capacity 9 t/axle, on-road version
- 1st axle fixed
- 2nd and 3rd axles fitted with turntable installation for forced steering

STEERING
- Forced steering "Tridec TR" on two turntable-guided axles, for heavy-duty applications
- Automatic forced steering, front fifth wheel plate with steering wedge
- Power transmitted via two steering rods, rear axles with turntable installation
- Central lubrication points for steering at the front fifth wheel plate and rear turntable
- Axle lift on 1st axle, lifts and lowers automatically depending on weight, start-up aid with speed limitation

BRAKING SYSTEM / SUSPENSION
- EBS system 2S2M, one axle sensored
- RSS/RSP – stability program
- Spring-actuated parking brake on 2 axles
- Aluminium air tanks
- Brake/air connectors with Quattromatic quick coupling
- EBS/ABS socket at the front
- Air suspension with lift/lower function, total travel approx. 200 mm
- Automatic adjustment to programmed driving level above 15 km/h

ASSISTANCE / SAFETY SYSTEMS
- Axle load display via EBS CAN bus signal for in-cab display
- Wabco SmartBoard for data reading via display (mileage, axle aggregate load, brake diagnostics, etc.)

FLOOR
- Phenolic plywood floor 27 mm with steel hat profile rails over longitudinal beams
- Floor load capacity 7,200 kg forklift axle load

ACCESSORIES / GENERAL
- Aluminium forklift guard strip bolted on both sides of outer frame
- Aluminium forklift guard strip screwed transversely at rear
- Enclosed SPECIAL steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides
- Galvanized steel toolbox / Monochrome painted lid
- 8 removable hardwood crossbeams approx. 100/100 mm with steel edging, fixable in plug-in sockets in outer frame

Very good condition, German registration documents, immediately available.

Объявление было переведено автоматически. Возможны ошибки перевода.