Платформа

Faymonville MAX Trailer 3-Achs-Plateau-Sattelaufl.

Loading area:
-2 pairs of lashing rings can be folded outwards (LC 5,000 daN)
24 pairs of cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN)

Seat posts:
-JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load)

Axles and tires:
-BPW axles, air-sprung, with disc brakes (430 mm), with lifting/lowering function
-385/65 R 22.5 tires

Brake system:
-WABCO brake system in accordance with EU regulations with EBS-E (2S2M)

Paint finish:
-First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer
A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey
-Rear part metallized and painted in RAL 9010 (pure white)
-No metallic paint finish possible

Steel construction:
-steel construction made of high-strength fine-grained steels
-Steel qualities:
-S355J2+N/S355MC (yield strength 355MPa)
-S690QL/S700MC (yield strength 690Mpa)

Bdsdpfsiu Etksx Aahsa
Electrical system:
-Electrical system according to EU regulations
-Lighting 24 Volt
-ASPÖCK-NORDIK (ASS3)
-ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets
-Connection according to ISO.
-24N ISO-1185
-24S ISO-3731
-15-pin ISO-12098

Accessories included:
-Yellow-red air couplings on the galvanized connection strip at the front
-4 pieces of restraining shoes with bracket
-2" kingpin
-One galvanized steel end wall approx. 1,600 mm high. EN12642-XL
-White reflector tape in accordance with EU regulations on the side of the trailer and red at the rear
-European reflector plates (red/yellow) at the rear of the trailer
-Loading area with approx. 30 mm thick hardwood floor edged in omega profiles
-10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed
-3 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions
-Storage for 1,000 mm stanchions, at the rear in the central support
-1 Spare wheel holder under the cargo bed on the right in the direction of travel
-One mud flap at the rear of the trailer
-Manual and description on USB stick
-One bracket for a rotating beacon at the rear of the trailer
-One bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including socket
-6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers or 1x 40ft container. Flush with the rear
-Speed stickers 80 km/h at the rear and on both sides
-Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with one LED position light
-Load manometer for determining the axle loads including load diagram
-HRM metallization (High Resistance Metallization) of the outer frame
-Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Объявление было переведено автоматически. Возможны ошибки перевода.