Открытый полуприцеп с тентомKÖGEL
CARGO Pritschensattelanhänger
Открытый полуприцеп с тентом
KÖGEL
CARGO Pritschensattelanhänger
Состояние
Новый
Местонахождение
Essen 

Базовые данные
- Обозначение:
- Открытый полуприцеп с тентом
- Производитель:
- KÖGEL
- Модель:
- CARGO Pritschensattelanhänger
- Состояние:
- новый
Цена и местонахождение
- Местонахождение продавца:
- Heegstraße 6-8, 45356 Essen, Германия

Позвонить
Технические детали
Размеры и вес
Общий вес:
42 000 кг
Максимальная грузоподъёмность:
35 020 кг
Оси и колёса
Конфигурация осей:
3 оси
Системы безопасности
ABS
Детали предложения
- Код объявления:
- A233-66-680
- Референс-номер:
- 38614
- Обновление:
- в последний раз 21.11.2026
Описание
You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt from the equipment list. Complete equipment list available upon request.
10300.108: Coupling plate, approximately 8 mm thick, with a 2-inch fifth-wheel kingpin according to DIN 74080 / ISO 337.
Chassis:
I 17160.010: Axle lift mechanism on axle 1.
18330.700: Manufacturer (optional): Kögel - Three-axle unit, with disc brakes, approximately 430 mm in diameter, offset approximately 120 mm. Air suspension with approximately 180 mm of travel.
Vehicle Tires:
20540.040: Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J).
Chassis Components:
20110.010: Fifth-wheel supports (manufacturer optional: Kögel), mechanically adjustable with leveling foot, lifting capacity approximately 24 tons. Single-side operation on the right when traveling.
21070.115: Splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011, for three-axle unit with 385/65 R22.5 tires, consisting of 1 pair of quarter-circle mudguards in front of the axles, and 1 pair of quarter-circle mudguards with splash flaps behind the axles.
I 25010.025: Pallet box for 24 Euro pallets, completely enclosed, protected against spray water, and also acts as a lateral protective device.
I 25090.220: Ground clearance (front) approximately 220 mm.
I 25470.060: Storage for 8 square tube inserts, dimensions: approximately 340 x 220 x 2,150 mm. Installation behind the axle unit.
Brake / Air Suspension System:
32110.057: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection.
32125.010: EBS system (manufacturer optional: Kögel).
33420.040: Air suspension system including 1 lifting and lowering valve, mounted on the left side while traveling behind the axle unit. Driving position is automatically adjusted.
Floor:
40510.120: Plate floor, approximately 30 mm thick.
I 40513.020: Floor sealed around the edges.
I 40542.011: Pocket for square tube inserts, approximately 80 x 80 mm, arrangement according to drawing A2: 2 pairs on the longitudinal beam in the 1st and 2nd positions, 8 pairs in the outer frame.
Superstructure:
L 46502.011: Quick-release system at the front for side tarpaulin with tension bars and pivoting lever.
46503.010: Quick-release system at the rear for side tarpaulin with tension bars and ratchet.
46538.010: Meets superstructure strength requirements according to EN 12642 XL (VDI 2700). Tested for a payload of 27,000 kg.
Front Wall:
41510.125: Front wall in superstructure height with aluminum corner profiles, riveted with aluminum hollow profiles, bolted/riveted to the frame.
Rear Wall:
Kdodpfxo Alda Eo Ammsw
42400.563: Double-leaf rear portal door made of aluminum, approximately 2,630 mm wide.
42505.040: 4 integrated twist-lock fasteners (2 on the left, 2 on the right), manufacturer optional: Kögel.
I 42540.256: Bolted steel corner profiles at the rear in portal height with additional ram protection up to the first door hinge.
Side Wall:
I 27140.010: Snap-in profile on the outer frame for sliding tarpaulin (required for pockets in the outer frame).
43500.300: 3 pairs of KÖGEL sliding beams with a receiving height of approximately 600 mm for 5 insert slats stacked on top of each other from the top edge of the floor. Firmly att
Объявление было переведено автоматически. Возможны ошибки перевода.
10300.108: Coupling plate, approximately 8 mm thick, with a 2-inch fifth-wheel kingpin according to DIN 74080 / ISO 337.
Chassis:
I 17160.010: Axle lift mechanism on axle 1.
18330.700: Manufacturer (optional): Kögel - Three-axle unit, with disc brakes, approximately 430 mm in diameter, offset approximately 120 mm. Air suspension with approximately 180 mm of travel.
Vehicle Tires:
20540.040: Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J).
Chassis Components:
20110.010: Fifth-wheel supports (manufacturer optional: Kögel), mechanically adjustable with leveling foot, lifting capacity approximately 24 tons. Single-side operation on the right when traveling.
21070.115: Splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011, for three-axle unit with 385/65 R22.5 tires, consisting of 1 pair of quarter-circle mudguards in front of the axles, and 1 pair of quarter-circle mudguards with splash flaps behind the axles.
I 25010.025: Pallet box for 24 Euro pallets, completely enclosed, protected against spray water, and also acts as a lateral protective device.
I 25090.220: Ground clearance (front) approximately 220 mm.
I 25470.060: Storage for 8 square tube inserts, dimensions: approximately 340 x 220 x 2,150 mm. Installation behind the axle unit.
Brake / Air Suspension System:
32110.057: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection.
32125.010: EBS system (manufacturer optional: Kögel).
33420.040: Air suspension system including 1 lifting and lowering valve, mounted on the left side while traveling behind the axle unit. Driving position is automatically adjusted.
Floor:
40510.120: Plate floor, approximately 30 mm thick.
I 40513.020: Floor sealed around the edges.
I 40542.011: Pocket for square tube inserts, approximately 80 x 80 mm, arrangement according to drawing A2: 2 pairs on the longitudinal beam in the 1st and 2nd positions, 8 pairs in the outer frame.
Superstructure:
L 46502.011: Quick-release system at the front for side tarpaulin with tension bars and pivoting lever.
46503.010: Quick-release system at the rear for side tarpaulin with tension bars and ratchet.
46538.010: Meets superstructure strength requirements according to EN 12642 XL (VDI 2700). Tested for a payload of 27,000 kg.
Front Wall:
41510.125: Front wall in superstructure height with aluminum corner profiles, riveted with aluminum hollow profiles, bolted/riveted to the frame.
Rear Wall:
Kdodpfxo Alda Eo Ammsw
42400.563: Double-leaf rear portal door made of aluminum, approximately 2,630 mm wide.
42505.040: 4 integrated twist-lock fasteners (2 on the left, 2 on the right), manufacturer optional: Kögel.
I 42540.256: Bolted steel corner profiles at the rear in portal height with additional ram protection up to the first door hinge.
Side Wall:
I 27140.010: Snap-in profile on the outer frame for sliding tarpaulin (required for pockets in the outer frame).
43500.300: 3 pairs of KÖGEL sliding beams with a receiving height of approximately 600 mm for 5 insert slats stacked on top of each other from the top edge of the floor. Firmly att
Объявление было переведено автоматически. Возможны ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2003
68 Объявления онлайн
Отправить запрос
Телефон & Факс
+49 201 8... объявления
Ваше объявление было успешно удалено
Произошла ошибка


















