Low loader semitrailer

WIESE Tiefbett, hydr, Rampen, Lenk 2achs

WIESE SA 35 CS-S Step-frame semi-trailer with electric/hydraulic lift table/low-bed and electric/hydraulic folding ramp
* First registered 05/2018, GVWR: 35t, Payload: 21.02t
* Fifth wheel position 0.98m, suitable for 2 or 3-axle semi-trailers
* LED lighting
* 2 additional rear lights, 2 work lights each on the left/right
* Mounting for rotating beacon at the rear of the vehicle

BPW Eco axles with TRIDEC hydraulic axle suspension, 2 x 10t, drum brakes, air suspension, lifting/lowering
* Twin tires: 235/75 R17.5, tire condition: (8/8-7/9mm, 11/10-8/9mm)
* (2 x E-tires 6+7mm on the front wall)

Load securing:
* Perforated outer frame with 2.5t lashing force per hole
* 4 pairs of lashing eyes in the gooseneck, 3.5t
* 6 pairs of lashing rings in square recesses on the lift table, 3.5t
* 2 pairs of heavy-duty lashing eyes, 8t, at the corners
* 5 pairs of lashing rings in square recesses, 3.5t, in the outer frame on the lift table
* 2 pole pockets in the lift table in the center

Superstructure
* Sliding tarpaulin and Edscha sliding cover with RSAB
* Hydraulic lifting roof with 0.4m lift, can be raised separately at 4 corner posts
* Aluminum insertion strips
* Gooseneck with screen-printed floor, 30mm
* Floor from the fifth wheel level made of tear plate - sandblasted
* 4 LED work lights on the loading area in the corners
* Large storage box 1.20m x 0.6m x 0.9m in front of the front wall for control unit, hydraulics, batteries, winch
* 2 batteries for powering the hydraulic units, 24V NATO socket for emergency operation
* Rear portal hydraulically extendable
* 2 pairs of overwidth signs, extendable up to approx. 1.30m each (approx. 5m total width)
Codpfx As Ah U N Aec Eeri

Ramp / folding ramp, electro-hydraulic:
* Design: 2-part extension ramp, 24t load capacity
* 5.57m (3.12m + 2.45m folding section)
* Platform made of galvanized heavy-duty grating
* Folding supports on the platform for ramp use
* Ramp can be used as a loading ramp, as a bridging ramp and as a loading platform
* 2 hydraulic rear supports
* Ramp operation via remote control or control block on the semi-trailer

Lift table integrated in the low-bed,
* can be raised/lowered at the front and rear electro-hydraulically / completely lowered,
* operated via remote control
* Load capacity 16t

Winch
Super Winch Talon 18.0

Dimensions
* Internal length 13.45m,
* Gooseneck 2.50 + 1.05m slope = 3.55m + 0.65m storage box on the front wall, height 2.74m, overall height 2.68m
* Hydraulic lift table/low-bed approx. = 5.15m, height 3.5m on the side, lift table can be completely lowered/raised by 0.42m or raised 0.78m at the front at the gooseneck
* Over the wheels 3.60m + 0.5m slope = 4.10m
* Internal length to the storage box on the front wall = 12.80m + 0.65 = 13.45m from the front wall

New price in 2018 over 155,000 euros net
----* We also gladly accept your old vehicle in part exchange!
* Lease purchase 24 - 72 months with and without down payment possible,
* Export license plates, short-term license plates as well as export documents possible
* WhatsApp
* ----Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
* Outside of opening hours, we are available by appointment

Объявление было переведено автоматически. Возможны ошибки перевода.