полуприцеп-низкорамник для перевозки строительной техники

Nükte Trailer 4 Axle Standard Lowbed Trailer

4 AXLE FIXED LOWBED SEMI-TRAILER

SHEET AND WELDING APPLICATION

• High-strength steel S355 or STRENX MC700 (MY INNER STRENX CERTIFIED)
• Synergic welding application.

DIMENSION RANGES
• Width from 2550 mm up to 4000 mm, depending on customer demand.
• Platform length from 5000 mm up to 12,000 mm.
• Total length from 10,700 mm up to 16,000 mm.

SIDE EXTENSION FEATURES
• Option to expand up to 250 mm on both right and left sides.

TRAILER GROUND CLEARANCE
• Height from 775 mm up to 1100 mm, depending on customer demand.

KING-PIN
• 2’’ or 3.5’’ King-Pin approved by ECE-R55 regulations.
• May vary for 4x2-6x2 or 6x4 tractor units.

AXLE AND TIRE FEATURES
Tjdpfxoz Ia Aps Acnec
• Tires suitable for 17.5 - 19.5 or 22.5-inch rims.
• Axles: Drums with 12 - 18 ton capacity.
• Lifting System: Automatic load-sensitive front axle lift available.
• Steerable Axle Options: A steer axle can be added upon customer request.

SUSPENSION FEATURES
• Mechanical or air suspension, depending on customer preference.

RAMP LEG OPTIONS
• Hydraulic sideways or a one-piece ramp with up to 9° loading angle.
• 24 V DC Power Pack (Hydro Motor). Special hydraulic cylinders with safety locks depending on options.
• The top of the ramp can be covered with wood or grid sheet.

BRAKE SYSTEM
• Brake system approved by ECE-R13 regulations.

ELECTRICAL SYSTEM
• 2x7 Pin socket according to ISO standards.
• 15 Pin ADR-compliant socket according to ISO standards.
• 7-function tail lamps (horn type).
• 2 white LED outline marker lights.
• Amber side marker lamps along the platform.
• Additional lighting for road and work conditions.

PAINTING APPLICATIONS
• Shot blasting at SA2.5 level per ISO standards prior to painting.
• Chemical cleaning after shot blasting.
• Zinc-rich or metallization application upon request.
• Painted in a baking booth with epoxy primer and acrylic paint.

ACCESSORIES
• 3 Storage lockers on the gooseneck,
• 2 Toolbox sets,
• Wheel chock,
• Front and rear rotating lamp,
• Work light,
• Galvanized tie-down rings,
• Galvanized expansion arms,
• Galvanized spare wheel bracket,
• Galvanized wide reflectors for side extension,
• 2 galvanized fire cabinet brackets.

TECHNICAL SPECIFICATIONS

Body and Chassis Design
• A high-strength steel chassis that boosts durability against heavy loads,
• Monoblock or modular chassis options to meet operational needs,
• Reinforced floor plates and crossbeams for long service life,
• Hydraulic or manual ramp systems for easy loading/unloading.

Load Capacity
• Various configurations from 3 axles to 10 axles,
• Load-carrying capacity from 30 tons to 120 tons, special designs for specific projects,
• Expandable platform options for large-volume loads.

Axle and Suspension Systems
• Special low chassis design minimizing loading height for stable transport,
• Air or hydraulic suspension options enhancing comfort,
• Steerable axle systems providing maximum maneuverability in tight corners and challenging terrains.

Brake and Safety Systems
• WABCO or Knorr-Bremse EBS brake system ensuring short braking distance and safety,
• ABS and automatic brake balancing for stability under heavy loads,
• Reinforced tie-down points for secure load fastening.

Tires and Rims
• Tire sizes 385/65 R22.5 or 245/70 R17.5,
• Steel or aluminum rims offering lightweight and durability.