Открытый полуприцеп с тентом

KÖGEL S24-1*Volumen* LiftA*Hubdach*

VIN: WK0S0002400300635

Permissible fifth wheel load: 12,000 kg
Permissible axle load: 24,000 kg (8,000 kg per axle)
Technically possible axle load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross vehicle weight: 39,000 kg
Technically possible gross vehicle weight: approx. 39,000 kg
Theoretical payload: approx. 29,478 kg
Ground load capacity according to DIN EN 283 with test axle load of 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle distance: approx. 1,310 mm
(A2) Axle distance: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Loading area length i.L.: approx. 13,620 mm
(G) Loading area width i.L.: approx. 2,480 mm
Gbodpfx Aezr Trzecior
(G2) Rear loading width: approx. 2,480 mm
(H1) Loading height unladen in driving position, horizontal: approx. 1,030 mm
(H2) Loading height laden in driving position, horizontal: approx. 1,000 mm
(H3) Reachable ramp height at the rear of the vehicle with fifth wheel coupling height of 910 mm, laden, raised: approx. 1,190 mm
Ride height set to 265 mm.
(K) Lateral loading height i.L.: front approx. 2,735 mm - approx. 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810-2,860 mm [adjustable by 1x50 mm]
(K1) Height i.L. under roof: front approx. 2,875 mm - approx. 3,000 mm [adjustable by 5x25 mm] | rear approx. 2,950 mm - approx. 3,000 mm [adjustable by 1x50 mm]
(X1) Overall height unladen in driving position, horizontal: = H1 + K + T +/- superstructure height adjustment | = S + P + K + T + - height adjustment
Superstructure adjustments: The design of the "Mega" superstructure allows for a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (overall height, lateral loading height, internal height) change accordingly to the selected superstructure setting.
(T) Roof height on the side: approx. 180 mm. Due to the design of the roof crossmember, the internal pallet width i.L. corresponds to the specified height i.L. under the roof.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing radius (according to ISO 1726): approx. 2,300 mm
(P) Height above the fifth wheel coupling: approx. 90 mm
(S) Possible fifth wheel coupling height unladen: approx. 940 - 1,070 mm, horizontal at approx. 940 mm (note overall height!)
Frame
Regular ladder frame in lightweight steel construction with through-bolted crossmembers.
Cover plate between outer frame and longitudinal beam as tire protection for the rear wheels of the tractor unit.
Coupling plate 8 mm thick, with a 2" fifth wheel kingpin according to DIN 74080/ISO 337
Suspension
Axle lift mechanism on axle 1
Control of the axle lift fully automatic, load-dependent. Start assist: Activation via 3x brake, 30% overload up to a speed of 25 km/h.
Three-axle unit SAF INTRADISC, with disc brakes Ø 370 mm, ET 120.
Air suspension with 260 mm travel
Chassis components
JOST fifth wheel supports, mechanical with outrigger, 24 t lifting capacity. Single-sided operation on the right in driving direction.
Side protection according to ECE-R73
2 large plastic toolboxes, watertight, dimensions (internal) approx. 923 x 422 x 460 mm. Installation at the rear 1x on the left and 1x on the right.
Extendable rear ladder on the right.
Height of the underrun protection profile min. 120 mm, designed for increased test forces.
Braking/air suspension system
WABCO EBS system
Air suspension system incl. 1 lifting and lowering valve, mounted on th

Объявление было переведено автоматически. Возможны ошибки перевода.