Полуприцеп с подвижным полом

KNAPEN K100NEXT 8mmBodenSAF,ALCOA TrichterFullOptionFun

WhatsApp
KNAPEN K100, fully equipped/full option, in TOP condition!!!
Tire condition: 45%-65%
EU vehicle, first owner!
Dimensions and weights:
Body length overall: 13,530 mm
Body width overall: 2,480 mm
Body height overall: tapered, front 2,690 mm, rear 2,785 mm
Volume: approx. 92 m³
Overall height: approx. 4,000 mm
Fifth wheel height: 1,150 mm
Valid for 2-axle semi-trailer
Permissible axle load: 24,000 kg
Permissible fifth wheel load: 12,000 kg
Unladen weight: approx. 7,780 kg
Equipment:
Chassis:
Stable and lightweight chassis made of welded steel construction using state-of-the-art robotic welding technology
Longitudinal beams made of steel, extending to the supports, reinforced for the installation of the axle unit and the sliding floor system, hot-dip galvanized
Lateral aluminum impact guard, foldable, open design NEXT
Design rear underrun protection with LED lighting, NEXT design
Axles and suspension:
3 x 9t SAF Intradisk integral axle, off-road, disc brakes (430mm), offset 120mm
Air suspension with lifting/lowering valve (ECAS) and limiting valve
Axle lift on 1st axle, fully automatic via EBS, including starting aid, controlled by braking 3 times and via Knapen radio remote control + PIN12
Wheels and tires:
6 x 385/65 R22.5 on 10-hole ALCOA DuraBright aluminum rims 11.75x22.5, offset 120
Chrome-plated wheel nut covers
Double spare wheel holder in front of the axles with 1 steel spare wheel
Braking system:
Automatic load-dependent two-circuit compressed air brake WABCO, according to EC directives
Spring brake parking brake
WABCO ABS 2S/2M incl. EBS
Aluminum air reservoir
Brake connections on the front panel (red/yellow)
Support:
Mechanical support legs, two-stage without load equalization with T-foot
Support load: 50,000 kg, lifting capacity: 24,000 kg
Fifth wheel plate:
Wear plate made of 10mm St 52-3 steel
2 König pins, screwed in from below, replaceable
Body:
All-aluminum construction
Floor boards made of 8 mm thick aluminum profiles, ribbed design with aluminum end caps
Floor fully covered with plastic sliding pads, 21-board system (1,200 in total)
Plastic wear plate at the rear under the floor boards
Front wall made of high-quality aluminum profiles with work platform and access on the left side in accordance with UVV
3 cross members, diameter 60mm in the trailer
Side walls made of aluminum hollow profiles, continuously welded
Stable top rail with integrated guide profile for the sliding partition, additional small tarpaulin at the front, roll tarp system equipped with brushes
Aluminum rear wall frame with 2-wing door made of aluminum hollow profiles, all around with double sealing profile and including pneumatic safety lock, with lubrication points located on a lubrication strip on the side
Four aluminum hinges with stainless steel bolts and one Knapen rotary locking mechanism per door leaf
Tsdpfx Abszqhwverea
Side mud flap in the rope, overhang on the left including fixed roll-up mechanism, operation at the front, color: dust gray RAL7037
Roll tarp BLACK 9005 approx. 900 g/m², complete with aluminum lath + crank, overlap approx. 400 mm
4 tarpaulin holders, foldable
Tarp with 4 tension straps on the sides
Mechanical-hydraulic system
Drive via three double-acting hydraulic cylinders
Changeover valve for changing the transport direction
CF 500 SL-C, with Knapen radio remote control
Hydraulic connections on the front panel with bent pipe and with hose and quick coupling
Electrical system:
6 round LED rear lights + 2x LED fog/reversing lights, 2-cha

Объявление было переведено автоматически. Возможны ошибки перевода.