Полуприцеп с рабочей платформой

FAYMONVILLE MAX Trailer MAX200 Sattelanhänger Megatrailer

Excerpt from the equipment list. Complete equipment list available upon request.

Loading platform:
Loading platform with hardwood floor and rear slope of approx. 1,000 mm x 8°
2 pairs of lashing rings (LC 5,000 daN)
1 pair of lashing rings (LC 10,000 daN)
6 pairs of lashing rings that can be folded outward (LC 5,000 daN)
2 pairs of lashing rings that can be folded outward (LC 10,000 daN)
Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)

Njdpfjzn Ec Djx Agleld
Kingpin supports:
JOST kingpin supports (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)

Axles:
BPW axles, air-suspended, with disc brakes (approx. 377 mm), with lifting/lowering function (ET 120)
Axle tool

Tires:
Tires 435/50 R 19.5

Braking system:
Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit

Steel structure:
Steel structure made of high-strength fine-grained steels
Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)

Paint finish:
First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red
Rear section metallized and painted in RAL 9010 (pure white)
Rims in silver

Includes the following additional equipment:
Yellow-red air couplings on the galvanized connection strip at the front
4 chocks with holder
2-inch kingpin
Yellow reflector strip in accordance with EU regulations on the side and rear of the semi-trailer
European reflector plates (red-yellow) at the rear of the semi-trailer
Loading platform with robust hardwood floor
1 spare wheel holder under the loading platform on the right side in the direction of travel
Galvanized folding supports under the slope of the loading platform
9 pairs of pocket rails for plug-in rails, approx. 100 x 50 mm, in the outer frame of the loading platform
One mudflap at the rear of the semi-trailer
Manual and description on a USB stick
One holder for a rotating beacon at the rear of the semi-trailer
One holder for warning signs including socket on the gooseneck and on the rear panel on the left and right
Speed stickers 80 km/h at the rear and on both sides
Load gauge for determining axle loads incl. load diagram
One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle
2 INOX toolboxes under the loading platform on the left and right, approx. 600 x 350 x 600 mm
6 pairs of WADER container pockets in the loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container
3 pairs of pocket rail strips mounted transversely in the loading platform, for plug-in rails approx. 100 x 50 mm
2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
Lift axle on the front axle with control via TEBS E depending on the current axle load and the current loading status
An acoustic warning signal when reversing
2 LED reversing lights mounted on the rear panel
HRM metallization (High Resistance Metallisation)

Объявление было переведено автоматически. Возможны ошибки перевода.