Полуприцеп с рабочей платформой

KÖGEL Multi Chassis, verstärkt, Bordwände

Excerpt from the equipment list. Complete equipment list available upon request.

Frame: Regular ladder frame in lightweight steel construction with continuous crossmembers. Chassis frame with front overhang. Coupler plate approximately 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337.

Suspension: Axle lift mechanism on axle 1. Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, track width 120. Air suspension with approximately 180 mm of travel.

Tires: Wheels with internal sensors according to UN ECE R141. Tires 6x 385/65 R 22.5 UNIROYAL TH 50. 6 steel rims 22.5 x 11.75, offset approximately 120 mm (ET 120).

Chassis Components: Mechanical landing gear with leveling foot, approximately 24 tons lifting capacity, single-sided operation on the right-hand side when facing forward. Storage box for: 10 side panels, folding posts, and rear door, fully enclosed, protected against spray, also serves as a side protection device. 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm, mounted at the rear, 1x left and 1x right.

Braking / Air Suspension System: EBS system 2S/2M with stability program (includes ABS/ALB function). EBS socket connection ISO 7638 (without connecting lines). Parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 socket connection. WABCO EBS system. Air suspension system including 1 raising and lowering valve, mounted on the left-hand side when facing forward, behind the axle unit. Vehicle ride height adjusts automatically. 2 interlockable coupling heads in the front ISO 1728. Air tanks for braking system and air reservoir made of steel (EN 286-2).

Floor: Plate floor approximately 30 mm thick, multi-layered plywood. Floor sealed around the perimeter. Recesses for square tube inserts approximately 80 x 80 mm. Storage for a maximum of 14 square tube inserts approximately 80 x 80 (length 1,990 mm) on the inner front wall.

Front Wall: Storage for a maximum of 14 square tube inserts approximately 80 x 80 (length 1,990 mm) on the inner front wall. Approximately 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame. 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front end wall according to EN 12640. Note: When using the front wall for load securing, suitable lashing straps must be used for tensioning, if the vehicle is operated without side panels and a rear door.

Rear Wall: Folding rear wall approximately 600 mm made of aluminum hollow profiles with 3 tensioners and T-rail locking mechanisms. 2 folding steps on the inside. Folding steel corner posts at the rear at the height of the side panels.

Side Walls: 4 pairs of folding posts at the height of the side panels. VarioFix steel hole outer frame. 4 pairs of post holders for folding posts on the outer frame (evenly distributed). 24 pairs of lashing eyes in the outer frame (according to EN 12640), permissible tensile force approximately 5,000 kg per ring.

Fjdpfxjzc A Afj Abkeph
Side Panels: 5 pairs of folding side panels approximately 600 mm made of aluminum hollow profiles with tensioners.

Electrical System / Electronics: Light carrier made of steel, arranged above the underride guard. KÖGEL LUXIMA Premium Package, consisting of: LED license plate lighting, LED outline lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the l

Объявление было переведено автоматически. Возможны ошибки перевода.