Прицеп с рабочей платформой

ES-GE Tandemanhänger - Bordwände, CV

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.

Excerpt from the equipment list. Complete equipment list available upon request.

Chassis:
* Steel welded construction made of welded longitudinal members and pierced Z-shaped cross members, close cross member spacing for high ground load capacity
* Ramp storage between the longitudinal members behind the axle assembly, two receiving pockets for one access ramp each below the loading floor, with a locking plate in the head frame at the rear

Underrun protection:
* Complies with EC regulations

Front coupling:
* Coupling with single-sided operation

Rear support:
* Two adjustable drop legs

Axles:
* 2 x 10 t air suspension axle assembly, manufactured by SAF, drum brakes approx. 300 x 200 mm, wheel connection center-mounted for twin tires, ABS, total suspension travel approx. 200 mm, of which lifting is approx. 140 mm and lowering is approx. 60 mm, controlled via hand lever with detent function

Tires:
* 8-ply, 235/75R 17.5 - manufacturer of our choice, on steel rim 6.75 x 17.5, with offset mounted

Splash guards:
* Made of PVC in front of and behind the axles, complies with EC regulations

Load securing:
* In the outer frame, a hole for lashing straps every approx. 150 mm, tensile force approx. 2.5 t (lashing straps can be attached to the closed side panels, sloping outer frame)
* 6 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t
* Recess pockets for lashing bars 80/50: 3 pairs of recess pockets in the outer frame, evenly distributed

Braking system:
* Air brake system complies with EC regulations with EBS
* Two spiral hoses as connection to the towing vehicle with coupling head red/yellow
* Spring-loaded parking brake acting on one axle

Floor:
* Approx. 28 mm Z-shaped hardwood floor embedded in the outer frame
* Front panel removable from the 25 mm side panel

Lighting:
* Lighting system complies with EC regulations, 24 volts, multi-chamber tail lights, license plate lights, side marker lights and position lights at the rear, connection plate on the left on the drawbar including connection cable with 15-pole and 2 x 7-pole plugs

Accessories:
* 2 chock blocks with holder
* Rotating beacon pluggable at the rear
* Delivery of an additional 40 mm drawbar coupling (GVW max. 13,500 kg)

Paint:
Nlodpfxjy Up Tie Ag Iob
* Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technology. Superstructure parts cleaned, primed and hot-dip galvanized
* Chassis: Hot-dip galvanized + RAL 9011 graphite black
* Side panels: RAL 9010 pure white
* Kingpin bars: RAL 9010 pure white
* Hubs: KTL black
* Underrun protection: RAL 9010 pure white
* Rims: RAL 9006 silver
* Add-on parts: galvanized / KTL black

Includes special accessories:
* Rear extension by approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm
* Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm, with screwed drawbar eye approx. 50 mm according to DIN 74053
* 4 rows of recess pockets transverse to the loading area, evenly distributed
* 12 lashing bars made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long
* Container locks for 1x20" container
* Container locks 1 x 20" extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452
* 1 pair of aluminum access ramps, load capacity per pair approx. 9,000 kg
* 4 x s

Объявление было переведено автоматически. Возможны ошибки перевода.