Прицеп с рабочей платформой

ES-GE Tandemanhänger - Bordwände, CV

You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.

Partial list of equipment. Full equipment details available upon request.

Chassis:
* Steel welded construction with welded longitudinal beams and through Z cross-members, narrow cross-member spacing for high floor load capacity
* Ramp storage between the longitudinal beams behind the axle assembly, under the loading floor, with two insertion pockets for one loading ramp each, locking plate in rear header

Underrun Protection:
* According to EU regulations

Front Landing Legs:
* Landing legs with single-sided operation

Rear Support:
* Two adjustable drop-down supports

Axles:
* 2 x 10 t air suspension axle assemblies by SAF, drum brakes approx. 300 x 200 mm, centrally mounted wheels for twin tires, ABS, total air suspension travel approx. 200 mm (lift approx. 140 mm, lowering approx. 60 mm), control via hand lever with latching function

Tires:
* 8 units, 235/75R 17.5 – make of our choice, on steel rims 6.75 x 17.5, mounted with offset

Splashguards:
* PVC, fitted in front of and behind the axles as per EU regulations
Rcsdpfx Apey Auhbjyob

Load Securing:
* Around the outer frame, one hole every approx. 150 mm for lashing straps, lashing force approx. 2.5 t (lashing straps can be hooked in with the side walls closed, chamfered outer frame)
* 6 pairs of folding lashing rings, evenly distributed, lashing force approx. 8 t
* Stake pockets for 80/50 plug-in posts: 3 pairs of stake pockets on the outer frame, evenly distributed

Brake System:
* Pneumatic brake system in accordance with EU regulations with EBS
* Two coiled lines for connection to the towing vehicle, red/yellow coupling heads
* Spring-loaded parking brake acting on one axle

Floor:
* Approx. 28 mm thick Z-type hardwood floor recessed into the outer frame

Front Wall:
* Made from 25 mm side wall, removable

Lighting System:
* Lighting according to EU regulations, 24 volt, multi-chamber tail lights, license plate lights, side marker lights, and lane marker lights at the rear, connection plate on the left at drawbar including connection cable with 15-pin and 2 x 7-pin plugs

Accessories:
* 2 wheel chocks with holder
* Removable beacon at the rear
* Supplied with an additional 40 mm towing device (GVW max. 13,500 kg)

Painting:
* Chassis shot-blasted, cleaned and hot-dip galvanized to latest technical standards
* Body parts cleaned, primed, and hot-dip galvanized

Chassis:
* Hot-dip galvanized + RAL 3002 carmine red
* Side walls: RAL 3002 carmine red
* Kinnegrip stakes: RAL 3002 carmine red
* Hubs: KTL black
* Underrun protection: RAL 9010 pure white
* Rims: RAL 9006 silver
* Attachments: galvanized / KTL black

Conspicuity Marking:
* According to EU, yellow on sides and rear

Including Special Accessories:
* Rear extension by approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm
* Mechanically adjustable drawbar adjustable in length, 6 x approx. 100 mm, bolted drawbar eye approx. 50 mm, according to DIN 74053
* 4 rows of crosswise stake pockets on the loading platform, evenly distributed
* 12 galvanized plug-in stakes, approx. 80/50/4 mm, approx. 1,000 mm long
* Container locks for 1x20' container, extendable to approx. 2,820 mm, as per ISO 1496, EN 284, or EN 452
* 1 pair aluminum loading ramps, load capacity per pair approx. 9,000 kg
* 4 stainless steel toolboxes between or behind the axles
* 6 pieces of

Объявление было переведено автоматически. Возможны ошибки перевода.