открытый полуприцеп

FLIEGL SZS 270 Mega Plateau Auflieger

Attention, the images shown are archive photos! The vehicle may currently be in use!

Weights and Dimensions:
Gross weight: 27,000 kg
Payload approx.: 22,200 kg
Aggregate weight: 16,000 kg
Stated fifth wheel load: 11,000 kg
Tare weight approx.: 4,800 kg +/- manufacturing tolerance

Overall length approx.: 13,850 mm
Overall width max.: 2,550 mm
Overall height approx.: 2,245 mm
Platform length approx.: 13,650 mm
Platform width approx.: 2,480 mm
Coupling height approx.: 950 mm
King pin installation dimension approx.: 1,680 mm
Front corner dimension approx.: 2,040 mm

Chassis - Semitrailer for Forwarding
High-tensile steel welded construction, fifth wheel plate with replaceable 2" king pin
13 pairs of lashing rings recessed into the outer frame, each with a 2.5-ton capacity
Outer frame with "Load-Lock profile" for lashing strap attachment
24-ton twin-speed landing gear, single-sided operation, straight lower part, without compensating link
Wheel chocks with holders
Side underrun protection, aluminium
Rear underrun protection, galvanized steel
Quarter-shell mudguards

Axles & Suspension
BPW disc brake axles
Air suspension

Brake System
2-line compressed air brake system
Spring-loaded parking brake
2 non-interchangeable couplings at the front, without connecting line
EBS, Electronic Brake System with EBS socket at front, no connecting cable
Caution: This trailer may only be towed by towing vehicles that ensure effective ABS operation!
With lift/lower valve
Vehicle stability control system

Wheels and Tyres
385/55 R19.5" make at manufacturer's discretion
Steel rims, factory silver

Electrics
24 volt, multi-chamber tail lights
Side yellow LED lighting as deeply recessed as possible
2 white position lights at front
2 white/red lane marker lights at rear
2 x 7-pin non-interchangeable sockets at front, without connecting cables

Floor
Anti-slip phenolic plywood, approx. 30 mm thick, cross joints with Omega inserts, on longitudinal supports for high point load resistance (for forklift axle load up to max. 7,100 kg)
Note: Floor warping due to weather influences possible!

Front Bulkhead / Corner Stakes
25 mm aluminium hollow profile, approx. 1,200 mm high, steel corner stakes in volume design, with 2 "inspection windows"

Approval / Signs
Country of Registration: Germany
With Dekra inspection and certificate
24/7 service hotline
Prepared for single-line license plate holder
Warning panel according to ECE-70
Contour marking with reflective tape in accordance with ECE R 048, white on sides, red at rear

Paintwork
Frame: RAL 3002 carmine red
Landing gear: Black coated
Front wall: RAL 3002 carmine red

Guedpfxey Sk Szo Agdjb
Attention, the images shown are archive photos! The vehicle may currently be in use!

Объявление было переведено автоматически. Возможны ошибки перевода.