Рефрижераторный полуприцеп

KRONE SDR 27 eL4-MT**ThermoKing*Zusatzverdampfer*LiftA

Unladen fifth-wheel height: 1,150 mm
Pallet/Storage box
3 axles, each with 9,000 kg load capacity
KRONE axles with air suspension and disc brakes, ET 120
Brake disc diameter: 430 mm
with lifting and lowering device
fully automatic, electronic, load-dependent lift axle control for 1st axle
Loading floor
Type: BO 13310
Low-noise aluminum floor pan, PIEK-compliant
Floor load capacity tested according to EN 283, rear area additionally reinforced
Box body:
Body: Cool Liner Multitemp (Duoplex Steel)
Thermal bridge-free panel construction, panels double-sided with steel cover layer, 100% CFC-free foam
Panel thickness floor: 125 mm
Panel thickness front wall: 50 mm
Panel thickness roof: 85 mm
Panel thickness rear doors: 90 mm
Panel thickness side walls: 45 mm
Internal length: 13,310 mm
Internal width: approx. 2,495 mm
Internal width reduced by base/skirting boards
Internal height: 2,650 mm
Front wall
Sandwich panel with reinforcement and cut-out for Carrier or Thermo King cooling unit: Shock tested according to Swedish standard,
Rsdjyytw Nopfx Aahsr
4 vertical distance profiles (100 mm) inside front wall for optimal air flow
Roof
Sandwich panel with steel cover layer, cable routing for temperature sensor and lighting in roof support angle
Internal reinforcement for raised evaporator, channel in the roof for routing refrigeration lines
V2A stainless steel protection for separate additional evaporator
Evaporator placed at rear left
4 LED ceiling lights, raised installation, laterally offset
Door contact switch for interior lighting
Side walls
Full panels in sandwich construction with steel cover layer, painted outside, PVC-coated inside, floor pan connected laterally and at the front with scuff-resistant aluminum angle baseboard, approx. 300 mm high
1 pair aluminum scuff strips on sides, height 285 mm
Height to bottom edge of 1st scuff strip above floor: placed just above baseboard
Rear wall
Double-wing rear doors, 3 aluminum hinges per door leaf, external dust seal system, V2A portal frame with lock chamber at top and bottom, external one-hand comfort locking system
Rubber buffer strip as lower cross bumper on rear portal
Additional vertical dock seal centrally on rear portal
Double one-hand comfort locks, rear
Aluminum scuff strips inside rear doors approx. 285 mm high
Door holder as crutch
2 red rear position lamps (LED) at top of rear frame
Accessories
Diesel tank (plastic), capacity approx. 240 liters, biodiesel compatible,
tank opening both sides, cap with cylinder lock
Tank sensor for diesel tank incl. LED level display at front wall
Cooling unit
Thermo King Spectrum SLX i for multitemp
Diesel/Electric, including i-Box,
with temperature/data logging (CargoWatch) incl. 2 temperature sensors, with additional evaporator type S-3 (deep freeze), System Two Zone B,
Refrigerant R 452 A
Installation and connection of the 2nd supplied temperature sensor for Thermo King cooling unit
Tires
6x, 385/65 R 22.5
Tread depths
Front axle: 4 / 7 mm
Middle axle: 10 / 10 mm
Rear axle: 4 / 3 mm

Customs plates and insurance available at extra cost! For export business, we can carry out export declaration and registration for you for a reimbursement of costs. For exports to non-EU countries, a security deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery.

Объявление было переведено автоматически. Возможны ошибки перевода.