Низкорамный полуприцеп

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Radmulden

You can find our complete range of vehicles, including those available immediately or at short notice, on our website.

Excerpt from the equipment list. Full equipment details available upon request.

Gooseneck:
* Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick

Loading Platform:
* Telescopic loading platform with rear slope approx. 1,000 mm x 8°
* 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D)
* Wheel recesses with square climbing laths approx. 15 x 15 mm, including extensions at the bottom
* Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D)
* Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each
* Recess in the slope and extending into the platform for accommodating an excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H))
* 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN)
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 2 pairs of fold-out lashing rings (LC 10,000 daN)
* 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN)
* Cut-outs in the platform's outer frame for attaching tie-down straps (LC 2,000 daN)

Two-Piece Steel Ramps:
* One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering
* Ramps with hydraulically folding ramp sections and hydraulic lifting system, hydraulically adjustable
Kwjdpfx Agjyhkq Uomow
* Maximum load per pair: 40,000 kg

Landing Gear:
JOST landing gear (mechanical) with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t)

Axles:
* BPW axles and suspension, 2 rigid axles, 1 trailing steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated automatically by reverse gear and manually
* Air suspension with lift and lower valve

Tyres:
* 235/75 R 17.5 3PMSF tyres – manufacturer of our choice

TPMS:
* TPMS tyre pressure monitoring system in accordance with ECE R 141

Brake System:
* WABCO brake system according to EU regulations with EBS-E (2S2M)

Paintwork:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection
* Final paintwork with two coats of 2K topcoat, solid RAL 3002 Carmine Red, in accordance with RAL System 841GL
* Wheel rims in silver grey

Incl. the following additional equipment:
* 2-inch king pin
* One galvanized steel front wall, approx. 400 mm high
* 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
* Electro-hydraulic power unit at the rear, under the loading platform
* On the gooseneck: plug-in aluminum drop sides and tail board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable (body length approx. 2,560 mm).
* One galvanized toolbox integrated in the gooseneck chamfer
* 2 pairs of WADER container pockets on the loading platform for a 20' or 30' container
* 3 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform
* 3 additional pairs of removable galvanized covers over the wheel recess – max. point load 3.5 t each
* One removable galvanized intermediate table with 1 pair of WADER container pockets
* 1 additional, hook-on intermediate table, approx. 300 mm wide
* Intermediate table with offset load ar

Объявление было переведено автоматически. Возможны ошибки перевода.