Низкорамный прицепMÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Низкорамный прицеп
MÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Фиксированная цена без учета НДС
44 500 €
(52 955 € брутто)
Год выпуска
2026
Состояние
Новый
Местоположение
Egestorf 

Показать изображения
Показать карту
Базовые данные
Цена и местонахождение
Фиксированная цена без учета НДС
44 500 €
(52 955 € брутто)
- Местонахождение продавца:
- Eichenstich 12, 21272 Egestorf, Германия

Звонок
Технические детали
- Максимальная грузоподъёмность:
- 23 830 кг
- Общий вес:
- 30 000 кг
- Конфигурация осей:
- 3 оси
- Длина грузового отсека:
- 8 460 мм
- Ширина пространства для загрузки:
- 2 520 мм
Детали предложения
- Код объявления:
- A207-87-247
- Справочный номер:
- 6098a2
- Последнее обновление:
- в 18.12.2025
Описание
* T3 profile 30.0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 to. BPW Eco axles
* Parabolic suspension
* Mechanical axle equalization at the rear
* Side underrun protection
* Swing-down supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each with splash protection
* Reflective contour tape on sides and rear
* Foldable (hot-dip galvanized) lid for the toolbox in turntable platform
* Multi-voltage electrical system
* LED tail lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and adjustable height via drawbar spring and turnbuckle
Isdpfx Ajx Ipbteh Ujbf
* 15-pin power connector
* Four stake pockets per side (stakes not included), each with integrated lashing options
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – in the corners rated 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope)
* Widening boards stored in the center of the loading area
* Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides within the digger stick rest)
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulic lateral ramp shift
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen load height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen load height approx. 910 mm (including 860 mm approach slope)
* Chassis, turntable, drawbar and loading ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Technical possible gross weight of 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Available from calendar week 12 / 2026
* Sample images
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 to. BPW Eco axles
* Parabolic suspension
* Mechanical axle equalization at the rear
* Side underrun protection
* Swing-down supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each with splash protection
* Reflective contour tape on sides and rear
* Foldable (hot-dip galvanized) lid for the toolbox in turntable platform
* Multi-voltage electrical system
* LED tail lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and adjustable height via drawbar spring and turnbuckle
Isdpfx Ajx Ipbteh Ujbf
* 15-pin power connector
* Four stake pockets per side (stakes not included), each with integrated lashing options
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – in the corners rated 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope)
* Widening boards stored in the center of the loading area
* Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides within the digger stick rest)
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulic lateral ramp shift
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen load height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen load height approx. 910 mm (including 860 mm approach slope)
* Chassis, turntable, drawbar and loading ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Technical possible gross weight of 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Available from calendar week 12 / 2026
* Sample images
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2001
Отправить заявку
Телефон & Факс
+49 40 33... объявления
Вам могут быть интересны и еще и эти объявления.
Малое объявление
Egestorf
5 270 km
Прицеп с рабочей платформой
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Малое объявление
Egestorf
5 270 km
Низкорамный прицеп
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Ваше объявление было успешно удалено
Произошла ошибка

































































