Прицеп с рабочей платформойMÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Прицеп с рабочей платформой
MÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Фиксированная цена без учета НДС
44 500 €
(52 955 € брутто)
Год выпуска
2026
Состояние
Новый
Местонахождение
Egestorf 

Показать изображения
Показать карту
Базовые данные
- Обозначение:
- Прицеп с рабочей платформой
- Производитель:
- MÜLLER-MITTELTAL
- Год выпуска:
- 2026
- Состояние:
- новый
Цена и местонахождение
Фиксированная цена без учета НДС
44 500 €
(52 955 € брутто)
- Местонахождение продавца:
- Eichenstich 12, 21272 Egestorf, Германия

Позвонить
Технические детали
- Максимальная грузоподъёмность:
- 23 830 кг
- Общий вес:
- 30 000 кг
- Конфигурация осей:
- 3 оси
- Длина грузового отсека:
- 8 460 мм
- Ширина пространства для загрузки:
- 2 520 мм
Детали предложения
- Код объявления:
- A207-87-257
- Референс-номер:
- 6098a
- Обновление:
- в последний раз 06.05.2026
Описание
* T3 Profile 30.0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic suspension
* Mechanical rear axle equalization
* Lateral underrun protection
* Swivel supports at the rear on the chassis frame
* Mechanically adjustable warning panel sets front and rear
Dedpfex Ipb Hsx Acyekl
* Front axle enclosed plastic mudguards and rear axle with straight galvanized steel skirts, each with splash guards
* Reflective contour tape on sides and rear
* Flip-up lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi-voltage electrical system
* LED tail lights
* Removable rotating beacon at rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (stakes not included), each also serves as lashing points
* Load securing package includes: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV lashing rings - swiveling and lowerable, loadable in all directions, recessed into the outer frame (13.4 t at corners, otherwise 10 t)
* 6 pairs of mechanical folding outriggers for a total width of 3 meters (not in the rear taper)
* Extension planks stowed in the center of the loading area
* Excavator arm rest above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest)
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulically adjustable ramp shift (sideways)
* Loading platform above the turntable: approx. 1,960 x 2,520 mm
* Unloaded loading height approx. 1,070 mm
* Rear loading platform: approx. 6,500 x 2,520 mm
* Unloaded loading height approx. 910 mm (including 860 mm approach angle)
* Chassis, bogie, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Gross vehicle weight technically possible up to 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and subject to prior sale
* Available from approx. calendar week 36/2026
Объявление было переведено автоматически. Возможны ошибки перевода.
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic suspension
* Mechanical rear axle equalization
* Lateral underrun protection
* Swivel supports at the rear on the chassis frame
* Mechanically adjustable warning panel sets front and rear
Dedpfex Ipb Hsx Acyekl
* Front axle enclosed plastic mudguards and rear axle with straight galvanized steel skirts, each with splash guards
* Reflective contour tape on sides and rear
* Flip-up lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi-voltage electrical system
* LED tail lights
* Removable rotating beacon at rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (stakes not included), each also serves as lashing points
* Load securing package includes: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV lashing rings - swiveling and lowerable, loadable in all directions, recessed into the outer frame (13.4 t at corners, otherwise 10 t)
* 6 pairs of mechanical folding outriggers for a total width of 3 meters (not in the rear taper)
* Extension planks stowed in the center of the loading area
* Excavator arm rest above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest)
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulically adjustable ramp shift (sideways)
* Loading platform above the turntable: approx. 1,960 x 2,520 mm
* Unloaded loading height approx. 1,070 mm
* Rear loading platform: approx. 6,500 x 2,520 mm
* Unloaded loading height approx. 910 mm (including 860 mm approach angle)
* Chassis, bogie, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Gross vehicle weight technically possible up to 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and subject to prior sale
* Available from approx. calendar week 36/2026
Объявление было переведено автоматически. Возможны ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2001
175 Объявления онлайн
Отправить запрос
Телефон & Факс
+49 40 33... объявления
Эти объявления также могут вас заинтересовать.
Малое объявление
Egestorf
5 270 km
Низкорамный прицеп
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Ваше объявление было успешно удалено
Произошла ошибка

















































