Полуприцеп с низкой погрузкой

Faymonville MAX Trailer 4-A-Mega-Tele-Semi-Rampen

For every used trailer, you will receive a current and comprehensive inspection and functionality report.

Gooseneck:
- Gooseneck with 30 mm thick hardwood flooring
- Gooseneck rear in straight design
- 3 pairs of lashing rings (LC 5,000 daN)

Extendable Loading Platform:
- Extendable design loading platform
- 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN)
- 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN)
- Cutouts in the external frame of the loading area for the attachment of tensioning straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, checker plate above the axles

Two-Part Steel Ramps:
- One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable position
- Maximum load capacity per pair: 40,000 kg

Axles and Tires:
- BPW axles, two rigid axles, two steered trailing axles
- Air suspension, drum brakes, lift/lower function
- Steered trailing axles with electromagnetic reverse lock, activated via reverse gear or manually
- Axle tool kit
- Tires: 205/65 R17.5
- TPMS tire pressure monitoring system according to ECE R 141

Accessories Included:
- One spare wheel with holder in front of the bulkhead
- 2" kingpin
- One galvanized steel front wall, approx. 400 mm high
- At the galvanized front connection strip: yellow-red air couplings
- 4 wheel chocks with holder at the front wall
Gbodpfx Absxwnfmeajw
- Galvanized folding supports under the loading platform chamfer
- One mounting bracket for a rotating beacon at the rear of the trailer
- Galvanized extendable width extensions, approx. 230 mm per side
- White reflective tape on the sides according to current EU regulations, on the extension and at the rear red
- One bracket each for warning boards with socket at the gooseneck and rear plate, left and right
- One mudflap at the rear of the trailer
- European reflector panels (red-yellow) at the rear of the trailer
- Removable ALU side and rear walls on the gooseneck approx. 2,440 x 400 mm
- Rear galvanized stake pockets are removable. Body length approx. 2,560 mm
- 7 pairs of WADER container pockets:
- 1x 20ft container on the loading platform
- 1x 40ft container on the loading platform
- 1x 40ft container above the gooseneck
- 2x 20ft container
- Bearing block with 1 pair of WADER container pockets (max. trailer load approx. 20,000 kg)
- 7 pairs of stake pockets for plug-in stakes 100 x 50 mm on the outer frame of the loading platform
- Lift axle on the front axle with control via TEBS E, depending on the current axle load and the current load condition
- Movable attachment rail for ALU loading ramps at the rear of the vehicle
- Sand-coated anti-slip paint on the checker plates on the gooseneck and loading platform
- Four warning signs, extendable by approx. 400 mm, size approx. 423 x 423 mm with position light
- Bracket for rotating beacon on the warning signs
- 80 km/h speed stickers on the rear and on both sides
- Load gauge for determining axle loads, including load diagram

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.