Открытый полуприцеп с тентом

KRONE SD Plane Mega Edscha Hubdach 2x Liftachse SDP27

Krone SD Mega Curtain Sider with Edscha Sliding Roof, Lifting Roof, 2x Lift Axles (1st and 3rd Axle), Multilock External Frame

### Image similar - example pictures ###

Perm. total weight: 36,000 kg
Curb weight: 6,196 kg
Payload: 29,804 kg
Unladen fifth wheel height: approx. 985 mm
BPW axles
Lift axles: 1st and 3rd axle
Air suspension
Disc brakes
Edscha sliding roof
Hydraulic lifting roof with 500 mm total lift, can be individually raised at all 4 corner stanchions
Tensioned curtain (sliding curtain)
Curtain can be opened on both right and left sides
Rear portal doors
Side underrun protection on right, left, and rear
2 crank landing legs
Rear right access ladder
Left side toolbox
Forklift accessible
Metal dock buffers
Multilock external frame
ABS
EBS
ALB
DIN EN 12642 Code XL certified
Wheelbase: approx. 6,350 + 1,310 + 1,310 mm
Loading platform LxWxH: 13,583 x 2,480 x 2,999 mm
External dimensions LxWxH: 13,950 x 2,550 x 4,000 mm
Clear loading height at rear portal: 2,795 mm
Clear loading width at rear: 2,480 mm (internal)
Tyres: 435/50R19.5 on ALCOA aluminium rims

Additional specifications:
Type: SD
Suitable for tractor units (ISO 1726 limited - tractor vehicle data required!)
Distance from kingpin to centre of landing gear approx. 2,720 mm
Unladen fifth wheel height: approx. 985 mm
Double-T chassis and centre beams as well as external frame welded with crossmembers and outriggers
Nledoxq Ibbspfx Ag Noh
Multilock external frame, universal load securing points every 100 mm
Front chassis height: 80 mm (incl. floor and fifth wheel plate)
2” kingpin
Rear underrun protection according to EC Directive
Side guards according to EC Directive
Rear sliding step ladder
Door retainer
Two mechanical support winders, 2 x 12 t, semi-circular with base plate
Single-sided operation of landing legs, right side from the front
3 axles, each with 9,000 kg load capacity
BPW axles, 19.5”, with air suspension (total lift 260 mm) and disc brakes (ET 120)
Brake disc diameter: 370 mm
With lift and lowering function incl. automatic ride height reset
Fully automatic, load-dependent electronic lift axle control for 1st and 3rd axles
Manual override at control unit for forced lifting (starting aid per Directive 97/27/EC) and forced lowering via rotary switch
Note: reduced ground clearance in area of lift axles!
Lift axle sequence: 3rd axle lifts first / lowers last
Plastic wheel cover (mudguard)
Spray protection according to EC Directive
Braking system according to ECE Regulation 13 (incl. vehicle stabilisation function)
Spring-loaded parking brake
Brake line connections at front approx. 675 mm above platform
Diagnostic via ISO7638 socket (EBS power cable)
Standard air couplings ISO 1728 (palm couplings)
Brake system make: Wabco
EBS system, 2S/2M, 2 sensors on one axle
Lighting and signalling in accordance with ECE R48
2 LED licence plate lights
2 LED outline marker lamps with rubber arms
LED side marker lights with direction indicator (flashing function)
Electrical cable connections at front approx. 450 mm above platform
24 volt, 7-pin socket at front (DIN ISO 1185)
7-pin socket DIN ISO 3731 at front for additional functions
Also 15-pin socket at front DIN ISO 12098
Multifunction rear lights
Steel rear corners as trapezoidal box
Delta rubber buffer crosswise at rear frame
1 toolbox, plastic, max. surface load 50 kg, external approx. 650x490x450 mm, left behind axle assembly
Pallet stop on side rail

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.