Низкорамный полуприцеп

FAYMONVILLE MAX Trailer MAX110 Semi-Tieflader

You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website.

Excerpt from the equipment list. Full equipment details available upon request.

Gooseneck:
* Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick

Extendable loading platform:
* Loading platform in extendable design with rear bevel approx. 1,000 mm x 8°
Rbodpfsxbmpfsx Aahow
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cut-outs in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with checker plate

Axles:
* BPW axles and suspension
* 1st axle rigid, all other axles hydromechanically forced-steered
* Technical axle load: 12,000 kg each
* Air suspension with lifting and lowering valve
* Axle tools

Tyres:
* 245/70 R 17.5 3PMSF tyres, load index (146/146 F)
* Brand of our choice
* TPMS tyre pressure monitoring system in accordance with ECE R 141
* Data transmission to the tractor unit via standardized EBS interface according to ISO 11992
* For correct display, the tractor unit must be able to transmit and display this data

Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting load (approx. 50 t test load)

Brake system:
* Wabco brake system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit

Paintwork:
* Entire steel construction automatically blast cleaned after welding with shot blasting system
* Second abrasive blasting with corundum for optimal adhesion of the coating system
* Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL
* Rims in silver grey
* Rear section metallized and painted in RAL 9010 (Pure White)
* Metallic paint not available
* Paint system tested in salt spray test according to ISO 9227-NSS
* Cavity sealing with special wax

Steel construction:
* Steel construction made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)

Electrical system:
* Electrical system in accordance with EU regulations
* 24 volt lighting ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets in accordance with ISO
* 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098

Including the following additional equipment:
* 2 inch king pin
* One galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on the galvanized connection panel at the front
* Electro-hydraulic unit
* Rear axle steering from both front and rear, operated via cable remote control with pushbuttons, including single-track control of the axles (without installation in the tractor)
* Galvanized folding supports under the rear platform bevel
* 1 pair of recessed lashing rings along the rear central beam in the bevel (LC 10,000 daN)
* On the gooseneck, plug-in aluminum side walls and rear wall, approx. 2,440 x 400 mm (L x H)
* The rear galvanized plug-in stanchions are removable. (Body length approx. 2,560 mm)
* One galvanized toolbox integrated in the chamfered gooseneck
* 3 pairs of WADER container locks in t

Объявление было переведено автоматически. Возможны ошибки перевода.