Полуприцеп с рабочей платформой

SCHWARZMÜLLER J-Serie Plateau Plattform Auflieger Liftachse

Schwarzmüller Platform Flatbed Trailer Lift Axle

Permissible total weight: 36,000 kg,

Unladen weight: 5,750 kg,

Payload: 30,250 kg,

SAF axles,

Lift axle 1st axle,

Air suspension,

Disc brakes,

Underride protection right, left, and rear,

2x storage compartment right,

1x storage compartment left,

Rubber rear impact buffer,

2x extensible wide load signs at the front,

2x extensible wide load signs at the rear,

2x crank supports operable from right side,

EBS,

ABS,

Perforated external frame with hole spacing approx. 100 mm,

Dkedpfx Abowqyrhs Aeg
Wheelbase: approx. 6,350 + 1,310 + 1,310 mm,

External dimensions LxW: approx. 13,840 x 2,550 mm,

Loading area LxW: approx. 13,620 x 2,480 mm,

Front wall height: approx. 2,400 mm,

Loading height: approx. 1,250 mm,

Tires: 385/65R22.5,

Tread depth tires left front: 4 mm,

Tread depth tires left middle: 16 mm,

Tread depth tires left rear: 8 mm,

Tread depth tires right front: 5 mm,

Tread depth tires right middle: 15 mm,

Tread depth tires right rear: 10 mm,


Further equipment:
Reinforced steel frame welded construction for point load 20 t over 4 m at frame center of gravity for ASH unladen 1,090 - 1,190 mm with air-suspended tractor, replaceable 2" kingpin (EU installation size, corner dimension 2,040 mm),
Perforated external frame with hole spacing approx. 100 mm, oval hole 40/25 mm according to DIN EN 12640
Air suspension with lift and lower function (approx. +120/-80 mm),
Automatic setting of driving level from 15 km/h,
SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, ø 430 mm, 3 x 9 t rigid, wheelbase 2 x 1,310 mm,
Front axle automatically liftable = 2-sided lift (1 x 96307) lifts and lowers automatically depending on weight (when lift axle is raised, the loading or total height increases by approx. 50 mm) and additionally with forced lowering incl. integrated start-up aid limited by speed for button operation in the cab (without button installation),
1 odometer = hubodometer (ECO-Meter) (KIT No. 10801, with hubcap KIT No. 52917) (on 2nd axle front right),
Mech. 2 x 12 t support winches, single-sided operation and push compensation,
Two-line brake,
EBS-E - electronic brake system (Wabco 2S2M = one axle = 2nd axle monitored),
RSS - stability program,
Spring-loaded parking brake on 2 axles,
Aluminum air tank, unpainted,
Plywood floor 27 mm, flush with outer frame,
2 steel hat profile rails above the longitudinal beams plus additional 12 mm plywood floor, beveled to the outer frame,
Fixed aluminum hollow profile front wall 2,400 mm with 2 center supports,

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.