Полуприцеп с низкой погрузкой

Faymonville MT 6-2+4-Achs-Tiefbett-Kombination

Gooseneck:
-Hydraulic gooseneck Raisable/lowerable and removable
-Length approx. 3,650 mm
-For tractor units: 6 x 4 or 8 x 4

2-axle chassis at the front:
-Hook attachments at the front and rear
-Chassis length x chassis width approx. 2,200 mm x 2,850 mm

Excavator bridge "BB-A":
-Telescopic excavator bridge "BB-A" with drive-over bridge hooks at the front and with bolt-and-link coupling at the rear
-Length x base width approx. 6,650 mm x 2,850 mm
-Beam height x beam width approx. 400 mm x 1,350 mm
-Loading height 550 mm with ground clearance 150 mm

4-axle chassis at the rear:
-Mechanical bolt-and-link coupling for attaching a low bed at the front, end cross member at the rear
-Chassis length x Chassis width approx. 5,480 mm x 2,850 mm
- Extensive lashing positions

Pendulum axle and tires (front and rear chassis):
- "Pendulum axle", all axles hydromechanically steered
- Hose rupture valve on the axle compensation cylinder with automatic reset function
- Hydraulic cylinder with shut-off valves and pins for securing in the raised position
- Final axle paint finish with two coats of 2-component paint in MB 7350 Nova Gray
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires 285/70 R19.5

Steering:
- Front and rear steering can be operated via cable remote control using push buttons, with axle alignment control
- Power socket for operating the steering system on the chassis Gooseneck
-Cable remote control with pushbuttons including axle alignment control

Accessories included:
-Yellow-red air couplings on the galvanized connection strip at the front
-Steel bulkhead, approx. 400 mm high
-4 wheel chocks
-3.5" kingpins
-One 7-pin socket on the left and right rear of the gooseneck for the warning sign
-Gallows with winch for spare wheel on the front of the gooseneck
-Truck hydraulic connection with flow regulator (40 l/min), including a boom for suspending the supply lines. The tractor unit's tank must hold at least 80 liters with couplings
-Aluminum side walls and rear wall that can be attached to the gooseneck, approx. 400 mm high, anodized
Gsdpfewcmhasx Abajbw
-Control lever on the gooseneck protected by a hinged cover
-A separate air connection with air gun on the gooseneck
-Bekamax central lubrication system, 1x on the Gooseneck, 1x on the 2-axle chassis and 1x on the 4-axle chassis
- Variomax tool kit
- Multi-coupling hydraulic connections on the gooseneck and in the area of the low-loader hook attachment
- 2 spare wheels
- One 7-pin socket on the left and right, front and rear of the rear chassis for the warning sign
- Front chassis with a separate air connection for pneumatic screwdrivers
- Foldable extensions with steel mattresses, adjustable in width from approx. 2,850 mm to approx. 3,250 mm
- The steel mattresses can be inserted in two positions to create a lowered loading area
- Steel mattresses with rubber flooring, approx. 12 mm thick
- Screw-in option (⌀ 40 mm) every approx. 500 mm outside on the upper chord of the outer tube of the excavator bridge for screw rings
- One locking point every approx. 500 mm on the extension with mechanical locking Locking mechanism
-A socket on the rear chassis for the cable remote control of the self-steering system
-Two reversing lights on the rear panel
-Four warning signs, approximately 423 x 423 mm, extendable by approximately 2,000 mm, with a position light
-One work light, left and right, on the rear panel of the gooseneck with separate on/off switches
-Two stainless steel tool boxes, approxim

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.