Полуприцеп с рабочей платформой

KÖGEL 3-Achs-Mega Chassis

You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website.

Excerpt from equipment features. Complete specification available upon request.

Chassis
- Regular ladder frame in lightweight steel construction with inserted cross members
- With pre-camber on the chassis frame
- Cover plate between outer frame and longitudinal member as tire protection for the rear wheels of the tractor unit
- Coupling plate approx. 8 mm thick, with a 2-inch fifth wheel kingpin according to DIN 74080 / ISO 337

Running Gear
- Axle lift mechanism on axle 1
- BPW three-axle ECO Air aggregate with disc brakes approx. 370 mm diameter, ET 120
- Air suspension with approx. 260 mm lift

Vehicle Tires
- 6-fold tires: 445/45 R 19.5, 160J

Chassis Attachments
- Mechanical landing legs with compensating foot, approx. 24 t lifting capacity, single-sided operation on the right driving direction
- Side underrun protection, foldable without tools, right and left in driving direction
- Spare wheel carrier with winch incl. 1 wheel fastening kit, mounted behind the axle aggregate
- Mounting for 16 square tube insert stakes approx. 80 x 80 x 1,990 mm, installed laterally on the longitudinal member on the left and right in the driving direction
- Waterproof plastic toolbox, approx. 545 x 400 x 400 mm (internal dimensions), mounted rear left in driving direction
- Retractable access ladder rear right

Brake / Air Suspension System
- EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638 (without connecting lines)
- Parking brake as spring-loaded brake
- External pneumatic connections and external EBS diagnostic connector via ISO 7638 plug
- WABCO EBS system
- Air suspension incl. 1 lift and lowering valve, installed in the driving direction left behind the axle aggregate. Driving position sets automatically
- 2 interchange-safe coupling heads at front ISO 1728
- Air tanks for brake system and air supply made of steel (EN 286-2)
Hfedsvxyvdjpfx Ab Ssn

Floor
- Panel floor approx. 30 mm thick, multilayer bonded plywood
- Rear floor joined
- Stake pockets for square tube insert stakes approx. 80 x 80 mm, arrangement according to drawing J9: 8 stake pocket rails (18 stake pockets per rail: 4 each outside + 10 central per rail)

Front Wall
- Front wall approx. 2,000 mm high with steel volume stakes, with profiled steel sheet, bolted/riveted with frame, 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) at the front wall according to EN 12640. Note: When using the front wall for cargo securing, suitable lashing straps must be used for tensioning if the vehicle is operated without side boards and rear wall flap/door!

Side Wall
- VarioFix steel perforated outer frame
- Without stake rack
- 24 pairs of lashing rings in the outer frame (to EN 12640), permissible tensile force approx. 5,000 kg per ring

Electrics / Electronics
- Lamp carrier made of steel, mounted above underrun protection
- KÖGEL LUXIMA Premium Package, consisting of: LED license plate lighting, LED position and front reflectors, flashing LED side marker lamps, Superseal and bayonet connectors for lights
- 2 contour lights with arm, mounted on multi-chamber tail light
- 2 multi-chamber tail lights
- Fixed adapter box with two 7-pin sockets (1x ISO 1185 / 1x ISO 3731, 24 V-N / 24 V-S) and 15-pin socket ISO 12098
- Compact orange LED beacon with mounting tube, arranged on the lamp carrier. Switch located in the beaco

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.