Низкорамный прицепMÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
Низкорамный прицеп
MÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
Фиксированная цена без учета НДС
35 900 €
(42 721 € брутто)
Год выпуска
2025
Состояние
Новый
Местоположение
Egestorf 

Показать изображения
Показать карту
Базовые данные
Цена и местонахождение
Фиксированная цена без учета НДС
35 900 €
(42 721 € брутто)
- Местонахождение продавца:
- Eichenstich 12, 21272 Egestorf, Германия

Звонок
Технические детали
- Максимальная грузоподъёмность:
- 14 400 кг
- Общий вес:
- 19 000 кг
- Конфигурация осей:
- 2 оси
- Длина грузового отсека:
- 6 270 мм
- Ширина пространства для загрузки:
- 2 470 мм
- Высота грузового отсека:
- 400 мм
Детали предложения
- Код объявления:
- A107-45-933
- Справочный номер:
- 6160
- Последнее обновление:
- в 10.07.2025
Описание
* ETÜ-TA-ER 19.0:
* WabcoEBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar with 50 mm flange eyelet and height adjustment of 110 mm via offset plate
* Jost landing gear at the front
* Outward folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor in clamped version
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Split steel side walls - trapezoidal profile - foldable with center folding stanchion
* Steel rear wall can be slid in between the ramps - holder for non-use inside in front of the front wall
* Rear stakes bolted
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t quick-lash rings possible every 600 mm
* Lasi package: in the corners at the front and rear each 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the front and end carrier for 1.2 t lashing options
* One-piece slide-in ramps approx. 2,750 x 620 mm
* Approach angle at rear approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports and drive-on ramps hot-dip galvanized
* --- Axles, air tanks, flange eyelet and landing gear painted in a shade of black ---
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
Tedomi Tcqspfx Af Hjf
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and interim sale excepted
* Immediately available from Egestorf
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
* WabcoEBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar with 50 mm flange eyelet and height adjustment of 110 mm via offset plate
* Jost landing gear at the front
* Outward folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor in clamped version
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Split steel side walls - trapezoidal profile - foldable with center folding stanchion
* Steel rear wall can be slid in between the ramps - holder for non-use inside in front of the front wall
* Rear stakes bolted
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t quick-lash rings possible every 600 mm
* Lasi package: in the corners at the front and rear each 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the front and end carrier for 1.2 t lashing options
* One-piece slide-in ramps approx. 2,750 x 620 mm
* Approach angle at rear approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports and drive-on ramps hot-dip galvanized
* --- Axles, air tanks, flange eyelet and landing gear painted in a shade of black ---
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
Tedomi Tcqspfx Af Hjf
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and interim sale excepted
* Immediately available from Egestorf
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2001
Отправить заявку
Телефон & Факс
+49 40 33... объявления
Вам могут быть интересны и еще и эти объявления.
Малое объявление
Egestorf
5 269 km
Прицеп с рабочей платформой
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Малое объявление
Gralla
5 571 km
Низкорамный прицеп
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Малое объявление
Bovenden
5 412 km
Низкорамный прицеп
Müller-MitteltalT 3 Kompakt 30,0, Hydr. Rampen, Verbr. auf 3m
Müller-MitteltalT 3 Kompakt 30,0, Hydr. Rampen, Verbr. auf 3m
Малое объявление
Triptis
5 399 km
Трал низкорамный
FlieglDTS 300 P
FlieglDTS 300 P
Малое объявление
Egestorf
5 270 km
Низкорамный прицеп
MÜLLER-MITTELTALT4, Luftfed., hydr. Klapprampe, Baggerstiel.
MÜLLER-MITTELTALT4, Luftfed., hydr. Klapprampe, Baggerstiel.
Ваше объявление было успешно удалено
Произошла ошибка


































































































