Открытый прицепMÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
Открытый прицеп
MÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
Фиксированная цена без учета НДС
29 900 €
(35 581 € брутто)
Год выпуска
2025
Состояние
Новый
Местоположение
Egestorf 

Показать изображения
Показать карту
Базовые данные
Цена и местонахождение
Фиксированная цена без учета НДС
29 900 €
(35 581 € брутто)
- Местонахождение продавца:
- Eichenstich 12, 21272 Egestorf, Германия

Звонок
Технические детали
- Максимальная грузоподъёмность:
- 10 500 кг
- Общий вес:
- 14 400 кг
- Конфигурация осей:
- 2 оси
- Длина грузового отсека:
- 7 000 мм
- Ширина пространства для загрузки:
- 2 470 мм
- Высота грузового отсека:
- 400 мм
Детали предложения
- Код объявления:
- A104-27-108
- Справочный номер:
- 6285a
- Последнее обновление:
- в 08.07.2025
Описание
* EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
Iedpfx Afel Th Dfersbd
* Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Front landing gear
* Rear folding support legs, externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Side walls made of trapezoid-profiled steel sheet, foldable, center-divided (1x)
* Rear wall made of steel, insertable between the ramps, storage bracket for non-use inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing shackles possible every 600 mm – 4 lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes for 1.2 t lashing options in the bulkhead and end crossmember
* One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding support legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and landing gear painted black
* Side wall color freely selectable up to approx. 2 weeks before production date; no metallic or special colors allowed
* --reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
Iedpfx Afel Th Dfersbd
* Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Front landing gear
* Rear folding support legs, externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Side walls made of trapezoid-profiled steel sheet, foldable, center-divided (1x)
* Rear wall made of steel, insertable between the ramps, storage bracket for non-use inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing shackles possible every 600 mm – 4 lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes for 1.2 t lashing options in the bulkhead and end crossmember
* One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding support legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and landing gear painted black
* Side wall color freely selectable up to approx. 2 weeks before production date; no metallic or special colors allowed
* --reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2001
Отправить заявку
Телефон & Факс
+49 40 33... объявления
Вам могут быть интересны и еще и эти объявления.
Малое объявление
Egestorf
5 270 km
Низкорамный прицеп
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
Ваше объявление было успешно удалено
Произошла ошибка

















































