Низкорамный прицепMÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
Низкорамный прицеп
MÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
Фиксированная цена без учета НДС
31 900 €
(37 961 € брутто)
Год выпуска
2025
Состояние
Новый
Местоположение
Egestorf 

Показать изображения
Показать карту
Базовые данные
Цена и местонахождение
Фиксированная цена без учета НДС
31 900 €
(37 961 € брутто)
- Местонахождение продавца:
- Eichenstich 12, 21272 Egestorf, Германия

Звонок
Технические детали
- Общий вес:
- 14 400 кг
- Максимальная грузоподъёмность:
- 10 500 кг
- Конфигурация осей:
- 2 оси
- Длина грузового отсека:
- 7 000 мм
- Ширина пространства для загрузки:
- 2 470 мм
- Высота грузового отсека:
- 400 мм
Детали предложения
- Код объявления:
- A104-26-931
- Справочный номер:
- 6285
- Последнее обновление:
- в 10.07.2025
Описание
* EBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Landing gear at the front
* Rear fold-out supports, externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall
* Side underrun protection
Ndodpfxel Thvxo Ag Nsc
* Plastic quarter mudguards
* 50 mm softwood floor
* Provision for retrofitting 20'' container locks in front of the front wall and at the rear
* Bolted smooth sheet metal front wall
* Side walls made of trapezoidal-profiled steel sheet, folding, split in the middle
* Steel rear wall, sliding, can be stored in front of the front wall when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing brackets possible every 600 mm – four lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front crossmember and rear end member for 1.2 t lashing options
* One-piece mechanical grid ramps with spring system for single-operator use, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and landing gear painted in black
* Color of side walls freely selectable up to approx. 2 weeks before production date (excluding metallic and special colors)
* --reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Landing gear at the front
* Rear fold-out supports, externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall
* Side underrun protection
Ndodpfxel Thvxo Ag Nsc
* Plastic quarter mudguards
* 50 mm softwood floor
* Provision for retrofitting 20'' container locks in front of the front wall and at the rear
* Bolted smooth sheet metal front wall
* Side walls made of trapezoidal-profiled steel sheet, folding, split in the middle
* Steel rear wall, sliding, can be stored in front of the front wall when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing brackets possible every 600 mm – four lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front crossmember and rear end member for 1.2 t lashing options
* One-piece mechanical grid ramps with spring system for single-operator use, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and landing gear painted in black
* Color of side walls freely selectable up to approx. 2 weeks before production date (excluding metallic and special colors)
* --reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2001
Отправить заявку
Телефон & Факс
+49 40 33... объявления
Вам могут быть интересны и еще и эти объявления.
Малое объявление
Egestorf
5 270 km
Открытый прицеп
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
Ваше объявление было успешно удалено
Произошла ошибка

















































