Трал низкорамныйFliegl
2-Achs Tieflade Anhänger ZTS 200 Spezial
Трал низкорамный
Fliegl
2-Achs Tieflade Anhänger ZTS 200 Spezial
EXW VB без учета НДС
43 900 €
(52 241 € брутто)
Состояние
Бывшее в употреблении
Местонахождение
Triptis 

Базовые данные
Цена и местонахождение
EXW VB без учета НДС
43 900 €
(52 241 € брутто)
- Местонахождение:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

Позвонить
Технические детали
- Собственный вес:
- 6 200 кг
- Максимальная грузоподъёмность:
- 11 800 кг
- Общий вес:
- 18 000 кг
- Конфигурация осей:
- 2 оси
- Первая регистрация:
- 05/2018
- Высота грузового отсека:
- 200 мм
- Общая длина:
- 11 600 мм
- Общая ширина:
- 2 550 мм
- Подвеска:
- воздух
- Размер шины:
- 235/75 R17,5"
- Цвет:
- красный
Детали предложения
- Код объявления:
- A826-55-99
- Референс-номер:
- 46253
- Обновление:
- в последний раз 06.06.2026
Описание
Additional information
Hodpfoi Ri N Ujx Akcjr
Chassis: Steel welded construction, double-curved with a low-bed section in front of and behind the axle unit, the low-bed section is angled for easier access, turntable with robust ball bearing race, foldable rear support, chocks, side impact protection, quarter-panel fenders
Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed section / rear axle: 6 pairs of lashing points on the side in the low-bed section, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of pocket recesses embedded in the outer frame, internally 70 x 40 mm, or instead of pocket recesses, 5-ton ring lashing points embedded in the floor
Drawbar: tested 40 mm drawbar eye
Axles: BPW drum brake axles
Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front
Electrical system: 24 volts, multi-chamber lights, yellow side lighting, 2 white position lights at the front
2 white/red outline marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable connectors at the front
Floor: curved section at the front with steel/diamond-plate covering, storage compartment embedded in the access ramp to the curved section, driving lane area and in the center between the beams with steel/diamond-plate covering, rear slope with 70 mm softwood floor, low-bed platform including rear slope 5900 mm
Ramps: mounting rail for aluminum ramps over the entire width, as a U-profile over the entire width
Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg
Storage compartment for ramps between the beams
Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear
Объявление было переведено автоматически. Возможны ошибки перевода.
Hodpfoi Ri N Ujx Akcjr
Chassis: Steel welded construction, double-curved with a low-bed section in front of and behind the axle unit, the low-bed section is angled for easier access, turntable with robust ball bearing race, foldable rear support, chocks, side impact protection, quarter-panel fenders
Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed section / rear axle: 6 pairs of lashing points on the side in the low-bed section, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of pocket recesses embedded in the outer frame, internally 70 x 40 mm, or instead of pocket recesses, 5-ton ring lashing points embedded in the floor
Drawbar: tested 40 mm drawbar eye
Axles: BPW drum brake axles
Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front
Electrical system: 24 volts, multi-chamber lights, yellow side lighting, 2 white position lights at the front
2 white/red outline marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable connectors at the front
Floor: curved section at the front with steel/diamond-plate covering, storage compartment embedded in the access ramp to the curved section, driving lane area and in the center between the beams with steel/diamond-plate covering, rear slope with 70 mm softwood floor, low-bed platform including rear slope 5900 mm
Ramps: mounting rail for aluminum ramps over the entire width, as a U-profile over the entire width
Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg
Storage compartment for ramps between the beams
Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear
Объявление было переведено автоматически. Возможны ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2006
196 Объявления онлайн
Отправить запрос
Телефон & Факс
+49 36482... объявления
Ваше объявление было успешно удалено
Произошла ошибка


























