Трал низкорамный

Müller-Mitteltal T40

Further information
Main and outer frame made of high-strength double T-profiles, grade ST 52.3, 4-fold longitudinally profiled, with high-strength front and rear ends and crossbars, frame behind the bogie run-through with flat offset offset and rear ramp slope 0.8 m long, lowest floor height due to recessed wheel wells above the rear wheels, front corners of the bogie platform bevelled at 45 degrees. 2 recessed UVV lashing rings each on the bogie platform and the drive-on ramp for attaching tensioning devices Rear end with wide bearings for ramp shaft with 6 bearings. Setiliche protective device with a protective strip according to EC, wheel chocks with clamping safety device
Low-maintenance angular roller bearing axles with automatic slack adjusters, dual-line air brake system in accordance with EC and parking brake
Bogie and drawbar: : Made of double T-profiles in welded construction with ball bearing slewing ring, standard drawbar length 1500 mm, with 8 eyelets 50 mm on average, drawbar support with threaded spindle as height adjustment device, vehicle has no axle compensation!
24 volt, 2 connecting cables 7-pole interchangeable, large rectangular four-chamber lights incl. shunt lights and reversing lights, distribution box at the front, clearance lights at the rear, side marker reflector lights and holder for single-line license plate
Underbody made of 40 mm thick pine wood, pressure-impregnated. Low loading platform and drive-on ramp with crossed top floor 30 mm thick, running lengthwise. Overall floor thickness 70 mm. Bogie platform with longitudinal single floor and recessed, open equipment box, size L 700 x W 800 x D 180 mm
Ramps: in shit construction with trough plate, cross beams, wooden decking running lengthwise, 50 mm thick, ramp tip reinforced, ramp holding rods with turnbuckle and safety catch, ramps can be moved on both sides by 470 mm each, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with outer and inner springs for easy one-man operation, with automatic floor supports
steel grit blasted, zinc phosphate primed, single color acrylic paint in RAL colors, wheels silver, traffic, light and metallic colors as well as two-tone paint, wood varnished
Gtjdpfji Rixgex Agbst

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.