Разбрасыватель навоза

Kumm KTR 18,5

_____Pump Tank Trailer KTR 18.5 Tandem, Professional Equipment:

Year of Manufacture: 2022
Approx. 32,000 m³ capacity
Isdpfx Ajz Dmaajn Eeig
24 tons permissible total weight
Fenders
Lower hitch, 4-ton support load K80
Drawbar, hydraulically height-adjustable
All suction lines, except for slide valves and quick couplings, are 8"
Vogelsang 6000 l rotary lobe pump with injection system,
Changeable impellers and reduction gearbox
Suction on the left side, 6" with quick coupling and stone trap
All slide valves as pneumatic slide valves / stainless steel blade (clog-free)
Automatic filling shut-off
Preparation for cutter and suction arm
Preparation for trailing shoe
Hose rack for suction hoses
Single-sided wide-angle universal joint with overload protection
Tires 750/60 R 30.5
TÜV approval, 40 km/h
2 LED work lights
LED lighting system
Preparation for lifting device

Special equipment:
(1124-B) Kumm-Profi-Pad 7" touchscreen operation
Application rate display
Individual button assignment for the respective hydraulic functions,
such as lowering/raising boom, adjusting boom, connecting arm,
pre-set program for Bomech trailing shoe
One press of a button and the stored function runs in sequence!
(1124-C) Application rate regulation
Automatic application rate regulation depending on driving speed, controlled via Kumm-Pad
(1124-D) Vogelsang rotary lobe pump 6,000 liters with injection system and changeable impellers
(1124-E) Tires 750/60 R 30.5, standard
(1124-F) Two-chamber system, standard
Two-chamber system as standard. Emptying: First at the rear, then at the front.
(1124-G) Air suspension with lifting/lowering valve, standard
(1124-H) BPW trailing steering axle, hydraulically lockable
(1124-I) Fenders, standard
Extremely large wheel cut-outs for a very low center of gravity and the greatest possible steering angle
(1124-J) Lower hitch K 80, 4.00 tons support load, standard
(1124-K) Hydraulic support leg, standard
(1124-L) Drawbar, hydraulically height-adjustable and sprung, standard
(1124-M) All suction lines, except for slide valves and quick couplings, are 8", standard
(1124-N) Suction nozzle at the front left with pn. plate slide valve and 6" quick-release coupling
(1124-O) Automatic filling shut-off
(1124-P) Preparation for cutter and suction arm
(1124-R) Preparation for tire pressure control system
Preparation for the installation of a tire pressure control system, standard! BPW axles pre-drilled!
(1124-Q) Preparation for trailing shoe and trailing hose booms
(1124-S) Preparation for suction boom above
Preparation for the installation of a suction boom above the vehicle, standard. Connection for front pump station, standard
(1124-T) Walterscheid universal joint
Walterscheid universal joint, single-sided wide-angle
(1124-U) Blow-out function
Possibility of emptying the entire boom system by means of compressed air
(1124-V) LED lighting
Rear lights completely LED. Turn signals with dynamic indicator (similar to "Audi" turn signals)
(1124-W) Preparation for lifting device
Possibility of installing a lifting device with 3/4-point mounting
(1124-ZA) Forced steering, electric
Forced steering, electro-hydraulic, suitable for KTR tandem vehicles
(1124-ZB) Axle load relief
Axle load relief at the touch of a button (to increase the support load, the front axle is relieved)
(1125-J) Cutter for KTR
Cutter Vogelsang Rotacut 10,000
Suction arm KTR, single-jointed
Suction arm 8", single-jointed with slide valve, ventilation,
Pressure limitation, incl. operation from

Объявление было переведено автоматически. Возможны ошибки перевода.