Низкорамный прицеп
MAX Trailer 600
Низкорамный прицеп
MAX Trailer 600
Фиксированная цена без учета НДС
58 600 €
(70 320 € брутто)
Состояние
Новый
Местонахождение
Marz 

Базовые данные
Цена и местонахождение
Фиксированная цена без учета НДС
58 600 €
(70 320 € брутто)
- Местонахождение продавца:
- Bundesstr. 9, 7221 Marz, Австрия

Позвонить
Технические детали
Размеры и вес
Общий вес:
42 000 кг
Максимальная грузоподъёмность:
33 975 кг
Общая ширина:
2 540 мм
Общая высота:
860 мм
Оси и колёса
Конфигурация осей:
> 3 оси
Системы безопасности
ABS
Детали предложения
- Код объявления:
- A213-65-417
- Референс-номер:
- MAX600-4A
- Обновление:
- в последний раз 14.10.2026
Описание
MAX Low-Bed Trailer NEW – 9.3 m Loading Area | Ramps | Approx. 34 tons Payload | from €58,600
New vehicle – can be individually configured according to your area of application.
Robust low-bed trailer with a curved loading area and a powerful ramp system for the professional transport of construction machinery, vehicles, and heavy equipment.
Designed for high payload, long service life, and safe use on construction sites.
Highlights:
* Approx. 33,975 kg payload
* Curved loading area with rear slope
* Hydraulic, adjustable steel ramps
* Ramp load up to 40,000 kg per pair
* Drawbar version with turntable
* High-strength steel construction
* BPW axles with air suspension
* EBS braking system
Technical data:
* Gross weight: 42,000 kg
* Unladen weight approx.: 8,025 kg (±3%)
* Payload approx.: 33,975 kg
Bledpoypazlefx Am Esp
* Loading area length: 9,300 mm
* Overall width: 2,540 mm
* Loading height at max. load: approx. 860 mm
* Axle track: 1,360 mm
* Speed: 80 km/h
Standard equipment:
* Curved loading area with approx. 48 mm hardwood floor
* Diamond plate covering over the axles
* Several lashing points up to LC 10,000 daN
* Galvanized, one-piece steel ramps (approx. 3,000 × 800 mm)
* Hydraulic ramp lifting system
* High-strength fine-grain steels S355 / S690
* BPW axles, air-suspended, drum brakes
* EBS braking system (2S/2M) with spiral cable
* LED lighting ASPÖCK NORDIK
Included options / equipment:
* Turntable with approx. 1,750 mm long drawbar and tow hitch Ø 50 mm
* Coupling height loaded approx. 630–810 mm
* Electro-hydraulic unit at the rear under the loading area
* Tire pressure monitoring system TPMS (ECE R141)
* Cover plates between ramps and loading area
* Control valves for ramps on the right side
* Galvanized supports under the loading area slope
* Rotating beacon bracket at the rear
* Extendable warning signs with LED
* Reflective tape according to EU regulations
* Additional license plate holder at the rear right
Further equipment and individual modifications are possible at any time – we configure your vehicle exactly according to your requirements.
Example photo. Equipment may vary depending on the configuration.
Объявление было переведено автоматически. Возможны ошибки перевода.
New vehicle – can be individually configured according to your area of application.
Robust low-bed trailer with a curved loading area and a powerful ramp system for the professional transport of construction machinery, vehicles, and heavy equipment.
Designed for high payload, long service life, and safe use on construction sites.
Highlights:
* Approx. 33,975 kg payload
* Curved loading area with rear slope
* Hydraulic, adjustable steel ramps
* Ramp load up to 40,000 kg per pair
* Drawbar version with turntable
* High-strength steel construction
* BPW axles with air suspension
* EBS braking system
Technical data:
* Gross weight: 42,000 kg
* Unladen weight approx.: 8,025 kg (±3%)
* Payload approx.: 33,975 kg
Bledpoypazlefx Am Esp
* Loading area length: 9,300 mm
* Overall width: 2,540 mm
* Loading height at max. load: approx. 860 mm
* Axle track: 1,360 mm
* Speed: 80 km/h
Standard equipment:
* Curved loading area with approx. 48 mm hardwood floor
* Diamond plate covering over the axles
* Several lashing points up to LC 10,000 daN
* Galvanized, one-piece steel ramps (approx. 3,000 × 800 mm)
* Hydraulic ramp lifting system
* High-strength fine-grain steels S355 / S690
* BPW axles, air-suspended, drum brakes
* EBS braking system (2S/2M) with spiral cable
* LED lighting ASPÖCK NORDIK
Included options / equipment:
* Turntable with approx. 1,750 mm long drawbar and tow hitch Ø 50 mm
* Coupling height loaded approx. 630–810 mm
* Electro-hydraulic unit at the rear under the loading area
* Tire pressure monitoring system TPMS (ECE R141)
* Cover plates between ramps and loading area
* Control valves for ramps on the right side
* Galvanized supports under the loading area slope
* Rotating beacon bracket at the rear
* Extendable warning signs with LED
* Reflective tape according to EU regulations
* Additional license plate holder at the rear right
Further equipment and individual modifications are possible at any time – we configure your vehicle exactly according to your requirements.
Example photo. Equipment may vary depending on the configuration.
Объявление было переведено автоматически. Возможны ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2015
50 Объявления онлайн
Отправить запрос
Телефон & Факс
+43 2626 ... объявления
Эти объявления также могут вас заинтересовать.
Успешно
Ваше сообщение было отправлено.
Малое объявление
Marz
5 450 km
Низкорамный прицеп
MAX Trailer 600
MAX Trailer 600
Ваше объявление было успешно удалено
Произошла ошибка


















