Трехсторонний опрокидыватель

MAN TGM 18.320 4x2 BL Krankipper Fassi 195

- Rear work lights
- Heated exterior mirrors
- Heated mirrors
- Passenger seat
- Bluetooth
- Differential lock
- Automatic climate control
- Air-suspended seats
- PTO (power take-off)
- Radio/multimedia system
- Beacon light
- Reversing camera
- Seat heating
- Sun visor
- Lane departure warning system
- Stability control
- Windscreen

Internal reference for customer inquiries: 4-028

MAN TGM 18.320 4x2 BL with PAVIC three-way tipper body and Fassi loading crane

Vehicle:

MAN TGM 18.320 4X2 BL Crane tipper
Cabin CC: the Compact (narrow, short, standard height)
Wheelbase 3,875 mm
Suspension leaf/air
Drive 4x2
Tires: front axle 2x 295/80R22.5, rear axle 4x 295/80R22.5
Gross vehicle weight 18,000 kg
Automatic transmission MAN TipMatic 12 12 OD
Diesel engine MAN D0836 LFLAP, 235 kW (320 hp) output, 1,250 Nm torque, Euro 6e
Transmission function: EfficientRoll
Cruise control
Rear axle differential lock
MAN EasyControl operating panel, 4 functions, operable from outside when door is open
Trailer coupling RINGFEDER Type 4040/G150B
Brake connection 2-line at frame end
Sun visor in front of windscreen
Central locking with remote control
MAN Mediasystem Navigation Advanced 7 inch
Heated and electrically adjustable rear and wide-angle mirrors
Driver’s air-suspended comfort seat with lumbar support, shoulder adjustment, and heating
Seat belt height adjustment, driver’s seat
2 work lights on cab roof
2 halogen beacon lights on cab roof
MEILLER axial pump 270/45
Tipper control inside the cab

Body:
Iasdpfx Absyk Dt Is Hjn
PAVIC three-way tipper 4,200 x 2,420 mm
Front wall height 800 mm
Side wall height 600 mm
8 recessed lashing rings in the bed (4 per side)
Material: Hardox 450
Resting support for horizontal placement of side wall with rubber support (for long goods transport)
Spring-assisted side wall lifting aid for easier opening and closing
2 lugs on front wall (e.g., for attaching a vibrating plate or grab bucket)
Tipper body hot-dip galvanized and side walls etc. painted completely with 2K truck paint in RAL9016
Subframe galvanized and painted in RAL9011
Left and right side made in one piece, can be opened on both sides pneumatically by air valve from the cab; dropside opening from below (pendulum), top to bottom manually, center stanchions removable
Spring-assisted side wall lifting aid for easier opening and closing
And much more.

Note: Additional superstructure equipment: Pre-prepared sections in the pillars for retrofitting a leaf guard (additional side extensions +500 mm for e.g. transport of pruning waste) -> Available in stock

Loader crane:
FASSI F195A.2.24 e-dynamic
Lifting moment 162 kNm (16.51 mt)
Hydraulic fourfold extension 12.7 m
e-dynamic hose equipment for 2 auxiliary devices
Slewing range 400°
Dual link system with PROLINK (over-bendable knuckle boom up to 15°)
Electronic overload cut-off with FX 500
FASSI stability control FSC incl. LMB II
Fassi RCS Radio remote maxi - 6 functions with 3 joysticks (2-2-2)
Special stabilizer, support width 6.64m hydraulically extendable incl. FSC
Stabilizers operable via radio remote
FL-System (Full Lift) switchable fast extension valve
LED work lights
...

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.