Подметальная машина

SCANIA G360

Chassis Scania G360

Year of manufacture: 06/2018
Chassis Scania G360 Features see attachment

Scarab Magnum Plus Hydrostat
Waste container with a capacity of 8.2 m³, made entirely of stainless steel (material no. 1.4301), including rear door
Water tank made of GRP with 1,850 L capacity, filling via C-coupling
Scarab transfer case
Hydraulic pumps for driving the drive system, turbine, and sweeping aggregates mounted on the transfer case
Hydrostatic drive, direction selection via lever on small control panel on the right, stepless driving speed via chassis accelerator pedal, cruise control
Tipping device with 2-stage cylinder
Automatic container support with pneumatic locking, manually operated safety support for rear door
Tipping process controlled via wired remote in the driver's cab
Water drain device for container, dual container inspection hatches right and left
Turbine mounted on top of the container, speed adjustable between 2,500 and 3,500 rpm
Hydraulic oil tank with 25 L capacity, return filter and sight glass
Oil cooler with hydraulic high-performance fan
Trailing suction shaft (740 mm) on the right, guided by two 250 mm rubber wheels
Water jets for dust suppression, manually and steplessly adjustable
Trailing disc brush on the right (650 mm), steplessly adjustable speed
Sweeping operation possible with disc brush retracted
Disc brush with overload protection to prevent damage when hitting obstacles
Dual water nozzles for dust suppression on disc brush
Central brush (400 mm), trailing, with shock absorbers for even wear
LED work lights for sweeping unit
Beacons on driver’s cab and waste container
Automatic lifting of all equipment when reverse gear is engaged
Gijdsx T N H Tepfx Agbsl
Container sieve of stainless steel, 1.5 m², hinged design
Hydraulically driven low-pressure pump for spray water 36 rpm at 3.5 bar
Spray nozzles for central brush mounted at the front under the bumper for spray water pump
CANbus 3b control/diagnostics system with compact control panel and status display
Small control panel on the right for basic functions and memory function
Sweeping distance counter integrated in the control system
Certified according to PM10 standard as per EU-United
Sweeping units on both sides
Additional suction shaft and side brush on the left with LED work light
Central brush swiveling
Sweeping units can be used simultaneously on left and right
Central brush contact pressure adjustable, setting on the far right, activation in the driver's cab
Additional side brush behind the front axle on the right, telescopic and swing-out, speed and contact pressure adjustable, 2 spray nozzles and an LED work light, standard 650 mm diameter, may vary in confined spaces
Side brush contact pressure adjustable
Driver's cab lightbar, 58", mounted on driver’s cab
Camera system with 3 cameras: 1. right aggregation, 2. left aggregation, 3. rear
Turbine flush with high pressure
Container penetration at the rear for Magnum Plus (required for rear surface suction)
Rear suction hose with 180 mm crane
Water drain valve 3" on rear door with sieve
GRP water tank 1,600 L for Magnum Plus (replaces 1,850 L GRP water tank)
Combination tank system: nested design, 2,500 L water tank plus 1,600 L GRP tank = total capacity 4,100 L
300 L diesel tank on right
Hydraulic oil tank and system compartment on left
Turbine flush with high pressure, rear container penetration for Magnum Plus (needed for rear surface suction), water drain valve 3" with sieve on rear door
GRP water tank 1,600 L for

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.