Косилка

Mulag MULAG MKF 600

MULAG Combination Mowing Device MKF 600 for Mounting on Unimog

Mowing combination MKF600 consisting of:
- Front boom mower MFK 500
- Verge mower MRF

Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification:

Equipment Front Boom Mower MFK 500
* Designed for right-hand operation
* Boom swivel range: 190 degrees
* Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators
* Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation)
* Float position of mowing units can be switched on/off
* Quick-change device for mowing units
* SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve
* Operating hours counter
* Proportional mlcontrol permanent hydraulics included
* (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously)
* Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off
* Operator information system with TFT color display, including system monitoring and diagnostic support
* Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable)
* Combination control panel
* Control of both units via multifunction control lever
* Oil cooling system with electric temperature monitoring included
* Tool drive via front PTO
* Hydraulic pump for 1st implement drive 62l / 340 bar
* Hydraulic pump for 2nd implement drive 50l / 280 bar
* Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil
* Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm
* Reach 6.50 m from vehicle center in combination operation
* Reach 7.00 m from vehicle center in solo operation
* 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions)
* Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate
* Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower
* Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog
* Hydraulic stabilizer legs included, 2 pieces, height adjustable
* LED work lights, 2 pieces, mounted on boom
* High-pressure water hose routing on boom

Verge Mower MRF 350 consisting of the following configuration:
Verge Mower MRF 350
* For right-hand operation
* Reach 3.50 m from vehicle center
* Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation)
* SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds)
Blsdpsxcxmljfx Afbsp
* Operating hours counter
* Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel.
* Single-hand operation unit with holder in Unimog

Verge Mowing Head RMK 1200
* Working width: 1200 mm, Cutting thickness: max. 10 mm
* MS-R blade
* Knife shaft speed: approx. 3000 rpm
* Standard sensing arm

Mowing Head MK 1200 plus
* Working width: 1200 mm, Cutting thickness:

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.