Трёхсторонний самосвальный прицеп

MEILLER MZDA 18.22 | Jahresendspurt*NEW*BJ 25*sofort

? 9 t each (technical axle load)
? Drum brake, size 420 x 180 mm, with asbestos-free brake pads and enclosed brake drum
? Offset ET0 (S-hub)
? Welded box-type link
? Standard wheel studs
? Electronically controlled dual-circuit compressed air braking system (EBS E+RSS) in accordance with EC regulations with automatic load-sensing brake valve (ALB), spring-loaded cylinder, and two interchangeable coupling heads
? ABS 2S/2M (Wabco), with connecting lines
? Electronically controlled air suspension (ECAS) with automatic rapid lowering during tipping to increase stability, can be deactivated for pavers
? Tires 385/65 R 22.5 profile S
? Painted steel rims
? Tire pressure monitoring system (TPMS) in accordance with EU regulation UN ECE-R 141
? Half-shell fenders with splash guard mat
? Plastic fenders
? Rigid underrun protection according to ECE R-58 (R58-03)
? Floor: 5 mm HBW 450 (Hardox 450 or equivalent)
? Bulkhead: 3 mm BS 70
Guodewgucmopfx Ab Ssh
? Left sidewall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET
? Right sidewall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET
? Rear wall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET
? Swinging and foldable left sidewall with spring relief
? Swinging right sidewall
? Spring relief on the left sidewall
? Swinging rear wall
? Rear wall with cam lock
? Fixed rear corner pillars
? Fixed left front corner pillar
? 150 mm long, fixed, straight discharge chute
? Safety support for the tipping body
? Dosing device with chains
? Access ladder on the left side of the bulkhead
? Without tow coupling
? Two interchangeable coupling heads with integrated line filters
? Aluminum air reservoir
? 7-pin ABS connection cable for EBS braking system
? 1 x 15-pin front adapter according to ISO 12098. Note: The towing vehicle must be equipped with a 15-pin socket according to ISO/DIS 12098.
? 1 x 15-pin electrical connection cable (Wendelflex)
? Hydraulic oil filled with HLPD-22 mineral oil. Note: Not in conjunction with kit shipping.
? Chassis frame painted (base frame, axle supports, and underrun protection - excluding attachments) in standard colors (all colors except metallic and special colors).
? Chassis frame color: black, standard color.
? Tipping body color: orange.
? Individual approval (e.g., TÜV or DEKRA) or COC
? Contour markings according to EC: white on the sides, yellow on the rear
? Manufacturer's confirmation
? COC Note: The COC is not yet available for all MEILLER products
? 1-year warranty period excluding annual inspections (UVV inspections)
? 24-volt five-chamber lights with integrated, triangular reflectors according to ECE-R 48, including lamp guards
? MEILLER standard axles (SAF or BPW)
? Floor-level, foldable lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipper body floor. Note: For retrofitted access steps, the specifications of Appendix 2 of DGUV Regulation 70 # Vehicles must be observed.
? PREVANTEC S package consisting of a swinging and foldable left side panel and floor-level, foldable lashing eyes (2 t) as well as plug-in lashing eyes (8 t) in the corners of the tipper body floor in accordance with DIN EN 12640. Note: For retrofitted access points, the specifications of Appendix 2 of DGUV Regulation 70 # Vehicles must be observed.
? Tipper body width 2,380 mm
Reference vehicle, similar to the illustration

Similar to the illustration. All information without guarantee / subject to prior sale.

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.