7.82 BDF Jumbo гладкостенный сменный кузов

Krone 7,82 BDF Jumbo Glattwandwechselbrücke

7.82 BDF Krone smooth-sided swap body with portal doors, used (multiple available)
Parking height 1120 mm
The swap body is waterproof
External dimensions in mm approx.:
Length 7820 Width 2550 Height 2925
Interior dimensions in mm approx.:
Length 7700 Width 2480 Height 2700
Lashing: Keyhole
4 container corner fittings on a 20' base, symmetrical overhangs
4 grab rails
Floor
Type: BO WST
27 mm thick, waterproof, glued plywood floor, strength according to DIN EN 283; For floor loads up to 5,460 kg forklift axle load
Box body
Interior height approx.: 2,700 mm
Total height approx.: 2,925 mm
Corner height approx.: 2,900 mm
Enclosed structure
Smooth side walls made of galvanized sheet steel cassettes
Roof made of trapezoidal profiled sheet steel, overall height: 25 mm
2 ventilation gills per side wall
# Rubbing strip and side wall with recesses
Forklift collision protection inside, 3-sided, approx. 300 mm high
Smooth end wall made of galvanized sheet steel cassettes
Interior end wall with 21 mm plywood panel, 750 mm high, with a continuous 12 mm plywood panel above it
Exterior end wall with offset at the top (optimized for cornering)
Interior side walls fully covered with keyhole plates
13 steel guide rails recessed on the left and right for Double-deck loading beam
Rcjdewbgrpjpfx Agleh
Light-weight loading beam for double-deck loading
Steel collision protection horizontally mounted on the left and right rear profile.

Please note: Actual dimensions and other specific details may vary slightly from the above specifications due to continuous product improvement.

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.