Сменный кузов с коробчатым кузовом

Krone 7,82 BDF Jumbo Glattwandwechselbrücke

7.82 BDF Krone smooth wall swap body, used (several available)
The swap body including the roof is painted on the outside in the customer's color. Common RAL color
The substructure and parts of the support feet are not painted, this is not visible after setting it down on the ground.
Parking height 1120 mm
The swap body is waterproof and the roller door is standard.
External dimensions in mm approx:
Length 7820 Width 2550 Height 2925
Inner dimensions in mm approx:
Length 7700 Width 2480 Height 2700
Door openings in mm:
Width 2370 Height 2600
Lashing: keyhole
For registration/operation maximum permissible. Total weight: 16,000 kg KLV-capable, including rail coding according to DIN EN 13044
Rail approval Code XL (for rail transport over 120 km/h)
Floor frame
195 mm high floor assembly including floor; rectangular tube longitudinal beams with cross beams and outer frame as a welded construction with guide tunnel underneath
4 container corner fittings on a 20' base, symmetrical overhangs 4 gripper bars
7 pairs of lashing rings on the side in the rub rail
Floor
Type: BO WST
27 mm thick, waterproof glued screen-printed panel floor, strength according to DIN EN 283; for floor loads up to max. 5,460 kg forklift axle load
2 ventilation openings at the front in the floor (according to GGVS)
Case housing
Structure TYPE AB WST
Inner height: 2700 mm
Portal height i. L. 2525 mm
Total height: 2,925 mm
Corner height: 2,900 mm
Closed structure
Smooth side walls made of galvanized sheet steel cassettes
Roof made of trapezoidal profiled sheet steel, construction height: 25 mm 2 ventilation gills per side wall
# Rubbing strip and side wall with recesses Forklift collision protection inside, 3-sided, approx. 300 mm high Smooth front wall made of galvanized sheet steel cassettes
Inside front wall with 21 mm screen-printed panel, 750 mm high, above it a continuous 12 mm screen-printed panel
Outside front wall at the top with offset (optimized for cornering)
Rear wall as roller door (width in length 2370 mm), with DB approval Train Plus, rollers can be replaced
Flat steel collision protection for roller door guide rail Inside side walls completely covered with keyhole plates
Nwedpfx Ahjvv R Ifstol
13 steel guide rails each set into the left and right to accommodate double-decker loading beams
13 LM loading beams for double-decker loading
Steel impact protection horizontally on the rear profile, left and right

Please note: Actual dimensions and other specific details may differ slightly from the above information due to
continual product improvement.

Объявление было переведено автоматически. Возможны ошибки перевода.