Низкорамный прицепMÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Низкорамный прицеп
MÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Фиксированная цена без учета НДС
29 900 €
(35 581 € брутто)
Год выпуска
2025
Состояние
Новый
Местоположение
Egestorf 

Показать изображения
Показать карту
Базовые данные
Цена и местонахождение
Фиксированная цена без учета НДС
29 900 €
(35 581 € брутто)
- Местонахождение продавца:
- Eichenstich 12, 21272 Egestorf, Германия

Звонок
Технические детали
- Максимальная грузоподъёмность:
- 10 750 кг
- Общий вес:
- 14 400 кг
- Конфигурация осей:
- 2 оси
- Длина грузового отсека:
- 7 000 мм
- Ширина пространства для загрузки:
- 2 470 мм
- Высота грузового отсека:
- 400 мм
Детали предложения
- Код объявления:
- A186-10-241
- Справочный номер:
- 6180
- Последнее обновление:
- в 14.01.2026
Описание
* ETÜ-TA-R 14.4:
----Brake system:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
Gbjdpfov D Tcbex Ab Hjh
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange towing eye:
* Drawbar height adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED lighting
----General attachments:
* Support winch at the front
* External folding support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted outside front right on the front wall
* Side underride protection
* Plastic quarter mudguards
----Low-loader deck:
* 50 mm softwood flooring
* Pre-fitted fixtures on the front wall and at the rear incline for subsequent installation of container locks for transporting 20" containers
* Bolted front wall made from smooth sheet metal
* Side walls made of folded steel sheet – trapezoidal profile – foldable, split once in the centre
* Rear wall made of steel, can be slid in between the ramp holders, stowed inside in front of the front wall when not in use
* Rear stanchions bolted
----Load securing:
* Perforated outer frame bent to approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring in each front and rear corner
* Several holes in the front and rear cross members for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh-access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paint finish:
* Drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side boards painted RAL 9010 pure white
* Side walls can be painted in a RAL colour of your choice at extra cost
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf at the A7
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
----Brake system:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
Gbjdpfov D Tcbex Ab Hjh
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange towing eye:
* Drawbar height adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED lighting
----General attachments:
* Support winch at the front
* External folding support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted outside front right on the front wall
* Side underride protection
* Plastic quarter mudguards
----Low-loader deck:
* 50 mm softwood flooring
* Pre-fitted fixtures on the front wall and at the rear incline for subsequent installation of container locks for transporting 20" containers
* Bolted front wall made from smooth sheet metal
* Side walls made of folded steel sheet – trapezoidal profile – foldable, split once in the centre
* Rear wall made of steel, can be slid in between the ramp holders, stowed inside in front of the front wall when not in use
* Rear stanchions bolted
----Load securing:
* Perforated outer frame bent to approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring in each front and rear corner
* Several holes in the front and rear cross members for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh-access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paint finish:
* Drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side boards painted RAL 9010 pure white
* Side walls can be painted in a RAL colour of your choice at extra cost
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf at the A7
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2001
Отправить заявку
Телефон & Факс
+49 40 33... объявления
Вам могут быть интересны и еще и эти объявления.
Малое объявление
Egestorf
5 269 km
Прицеп с рабочей платформой
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Малое объявление
Roosendaal
5 650 km
Контейнер для резервуара
CIMC20FT ISO, 25.050L / 1-COMP / 3 BAFFELS / T11 / ...
CIMC20FT ISO, 25.050L / 1-COMP / 3 BAFFELS / T11 / ...
Ваше объявление было успешно удалено
Произошла ошибка

























































































