Прицеп-цистерна

Schmies.eu STS VR-1.5 Saugfass, Vakuumsaugfass

Basic standard equipment
Standard models always in stock

Vacuum suction drum STS VR-1.5
Rear skip 1.500l

Tank
- Container 1,500 liter capacity
- Back tipper with wired remote control
- Hot-dip galvanized container
- Container tilted slightly backwards for better cleaning
- Side flushing opening in the container to remove dirt or blockages without opening the container lid
- Container lid opens completely to the passenger side and is secured with hook bolts
- 2 safety stages fitted as standard to prevent damage to the compressor
- Syphon separator
- Overflow with 2 balls and sight glass
Iedpfx Aeutcq Aogmstd
- Pressure gauge on oversuction set with protective bracket
- Mechanical fill level indicator with color scale

Motor and compressor
- MEC 3000 vacuum compressor with 3,500 liters air capacity
- Vacuum max. -0.8bar (continuous operation at -0.5bar)
- Overpressure max. 0.49 bar
- Maintenance-free V-belt drive for vacuum compressor
- B&S industrial motor Vanguard 13 hp
- Electric starter, oil sensor, control panel with ignition lock, battery and tank
- Internal intake hose to avoid protection in the motor unit
- Silencer for vacuum compressor with oil catcher
- Stainless steel heat deflector plate over the exhaust
- 1 liter biodegradable compressor oil stored in oil bottle holder
- 5 liter petrol can in holder
- Standard funnel with long neck for changing and refilling engine oil
- All engine components and accessories stored in lockable engine box

Chassis
- Self-supporting chassis, fully hot-dip galvanized
- Low loader tandem chassis 2.7t
- Track width identical to passenger car and Sprinter for optimum driving
- lowest possible center of gravity of the suction drum
- 2x axles with a load capacity of 1,350 kg each and independent wheel suspension from a well-known manufacturer
- Continuous welded V-drawbar
- Sturdy mudguards with metal lamp housing
- Stake holders for quick securing of the suction hoses using rubber bands
- Storage option for tools and accessories between the engine housing and

suction drum
- Overrun brake with Rückmatic
- Automatically securing ball coupling
- Reinforced support wheel
- 13-pin cable connection

Connections and hoses
- 2x suction hoses (3") 5m long with Perrot couplings
- 1x suction lance 3" (1500mm long)
- 1x Perrot connection (3") in the container lid at the bottom
- 1x Perrot connection (3") on the right side in the direction of travel


If you are looking for something other than this device, please do not hesitate to contact us directly. Our own vehicle construction leaves almost nothing to be desired.


For more detailed information and/or pictures, please contact us directly. You will find a large selection of other vehicles to BUY or RENT from us.
Subject to alterations, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is exclusively subject to our terms and conditions and under exclusion of any warranty.

Объявление было переведено автоматически. Возможны ошибки перевода.