Шламовая технология

Brand GT SP 600 HD

SP 600 HD
Brand slurry separator
in standard equipment
Motor power 5.5 KW
Speed 11.7 rpm
Screen basket Ø 258 mm
- Electric motor 400V, 50Hz, 1450 rpm
- Insulation class F=155°C
- Protection class IP55
- Corrosion-resistant stainless steel
Slotted screen basket
- Extra powerful heavy-duty gear
- Replaceable wear ring
- Sealing to the medium
by means of a radial shaft seal
- Adjustable outlet opening
for solids
- Service opening
(VA quick-closing cap)
- Inlet and outlet 4"
- Stainless steel heavy-duty press screw
with a
special hard material coating
- With a 1 mm screen basket
a TS content
of 35 - 40% in the solids is achieved

Eccentric screw pump 35-6LS
Minimum flow rate: at 75 rpm 5.6m /h
Max. delivery rate: at 350 rpm 29m /h
Nominal power 5.5 kW
Nominal speed 1460 rpm
Voltage 400/690 V
Nominal frequency 50 Hz
Protection class IP55
Winding protection TF - thermistor
Suction connection DN 125
Pressure connection DN 100
Incl. dry-run protection
Hoses and piping
Pipe construction and hoses
in the mobile unit.
Couplings are pre-mounted on the side of the device so that suction and pressure hoses can be connected.
Control cabinet separator and pump
Housing with door and
electrostatic powder coating
- Color signal gray
- Protective plate IP66
- Cable entry possible at the top and bottom
- Frequency converter for the pump
- Thermal fuse
- Weekly timer

Powder-coated steel frame
Steel frame for the separator
Hnedpfx Asubfu Ejh Njk
Frame length approx. 3000mm
Frame width approx. 1800mm
Frame height approx. 1250mm

Объявление было переведено автоматически. Возможны ошибки перевода.