Прицеп с рабочей платформойMÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
Прицеп с рабочей платформой
MÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
Фиксированная цена без учета НДС
34 950 €
(41 590 € брутто)
Год выпуска
2026
Состояние
Новый
Местоположение
Egestorf 

Показать изображения
Показать карту
Базовые данные
- Обозначение:
- Прицеп с рабочей платформой
- Производитель:
- MÜLLER-MITTELTAL
- Год выпуска:
- 2026
- Состояние:
- новое
Цена и местонахождение
Фиксированная цена без учета НДС
34 950 €
(41 590 € брутто)
- Местоположение:
- Eichenstich 12, 21272 Egestorf, Deutschland

Звонок
Технические детали
- Максимальная грузоподъёмность:
- 10 400 кг
- Общий вес:
- 14 400 кг
- Конфигурация осей:
- 2 оси
- Длина грузового отсека:
- 5 500 мм
- Ширина пространства для загрузки:
- 2 420 мм
- Высота грузового отсека:
- 500 мм
Детали предложения
- Код объявления:
- A162-17-593
- Справочный номер:
- 62651a
- Последнее обновление:
- в 14.01.2026
Описание
* ETK-TA-R 14.4:
----Brakes:
* EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar by 300 mm with 40 mm flange towing eye
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED tail lights
----General Attachments:
* Mechanical support winch at the front
* Two mechanical foldable supports at the rear
* Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side
* Bolted underrun protection
* Plastic quarter mudguards
----Chassis:
* Main frame made from fine-grain steel
----Tipper Body:
* Net hooks on the sides and rear at the central locking mounts, plus two at the front wall
* Steel pallet two-way tipper body, fixed front wall from smooth sheet, continuous drop sides without central stanchions, foldable with drop side spring lifter, and swinging with manual central locking
* Rear stanchions bolted
Hjdpotr St Hsfx Acvefb
* Steel rear wall inserted in front of the ramps
* One 5 t lashing point at each corner, four 3 t lashing rings recessed into the side outer frame
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-part mechanical grid driving ramps with aluminium tapered section, 2,150 + 1,300 mm x 600 mm (manually adjustable down to 80 mm)
----Coating:
* Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and driving ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Drop sides and tipper body in RAL 9010 pure white
* Painting of the side walls and tipper body in an RAL color available at extra cost
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available from week 07/2026
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
----Brakes:
* EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar by 300 mm with 40 mm flange towing eye
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED tail lights
----General Attachments:
* Mechanical support winch at the front
* Two mechanical foldable supports at the rear
* Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side
* Bolted underrun protection
* Plastic quarter mudguards
----Chassis:
* Main frame made from fine-grain steel
----Tipper Body:
* Net hooks on the sides and rear at the central locking mounts, plus two at the front wall
* Steel pallet two-way tipper body, fixed front wall from smooth sheet, continuous drop sides without central stanchions, foldable with drop side spring lifter, and swinging with manual central locking
* Rear stanchions bolted
Hjdpotr St Hsfx Acvefb
* Steel rear wall inserted in front of the ramps
* One 5 t lashing point at each corner, four 3 t lashing rings recessed into the side outer frame
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-part mechanical grid driving ramps with aluminium tapered section, 2,150 + 1,300 mm x 600 mm (manually adjustable down to 80 mm)
----Coating:
* Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and driving ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Drop sides and tipper body in RAL 9010 pure white
* Painting of the side walls and tipper body in an RAL color available at extra cost
----Information:
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available from week 07/2026
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2001
Отправить заявку
Телефон & Факс
+49 40 33... объявления
Вам могут быть интересны и еще и эти объявления.
Малое объявление
Egestorf
5 270 km
Низкорамный прицеп
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
Ваше объявление было успешно удалено
Произошла ошибка











































































