Трёхсторонний самосвальный прицеп

MÜLLER-MITTELTAL Agrar Tand. 3- Seiten, hydr. Heckklappe, Rampen

* KA-TA-RT 21.0 ML

----Brakes:

* Without ABS/EBS, approved for 40 km/h
* Spring brake parking brake
* Drum brakes

----Axles:

* Gigant axles

----Suspension:

* Tandem equalizer with 100 mm wide parabolic springs

----Drawbar eye / Drawbar:

* Fixed welded drawbar with low-maintenance collar for K80 ball coupling (adjustable by +77 mm / 33 mm via headplate) with high-set gantry for connection lines

----Electrical system / Lighting:

* 12 V, 7 + 4-pole power cable
* LED lighting system 12 / 24 V with protective grille
* 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side

----General components:

* Front support jack
* Mech. drop-down supports at the rear
* Side marker lights with turn signal control
* Plastic quarter fenders
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Hot-dip galvanized, two-step access ladder in front of the headboard (on the left side)

----Chassis:

* Chassis made of fine-grained steel

----Tipping body:

* Steel pallet-type 3-way tipping body with M-Strong sideboards (front wall fixed, continuous side walls - without center rails - pivoting via manual central locking and mechanically foldable with sideboard spring lifter)
* Hydraulic tailgate 500 mm high as hydraulic tipping gate with a 115° opening angle
* 4 mm Hardox 450 steel floor

----Load securing:

* 1 x 7 t. recessed and foldable lashing eye at each corner
* 4 x 3 t. recessed and foldable lashing eyes on each side

----Ramps:

* 1 pair of aluminum loading ramps (10 t / pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles
* 2 receptacles for aluminum loading ramps recessed at the rear in the chassis, load securing according to EN 12642 XL

----Coupling height:

* loaded approx. 530 mm & unloaded approx. 590 mm

----Painting:

* Body painted in RAL 9010 pure white
* Chassis, drawbar, drop-down supports at the rear, underrun protection hot-dip galvanized
* Axles, air tank, front support jack
* K80 coupling painted in a black tone

----Information:

Hedpjr Dpzuofx Andon
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to change

----Delivery time:

* Available immediately from Egestorf

Объявление было переведено автоматически. Возможны ошибки перевода.