Прицеп с рабочей платформойMÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Прицеп с рабочей платформой
MÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Фиксированная цена без учета НДС
29 900 €
(35 581 € брутто)
Год выпуска
2025
Состояние
Новый
Местонахождение
Egestorf 

Показать изображения
Показать карту
Базовые данные
- Обозначение:
- Прицеп с рабочей платформой
- Производитель:
- MÜLLER-MITTELTAL
- Год выпуска:
- 2025
- Состояние:
- новый
Цена и местонахождение
Фиксированная цена без учета НДС
29 900 €
(35 581 € брутто)
- Местонахождение:
- Eichenstich 12, 21272 Egestorf, Deutschland

Позвонить
Технические детали
- Максимальная грузоподъёмность:
- 10 900 кг
- Общий вес:
- 14 400 кг
- Конфигурация осей:
- 2 оси
- Длина грузового отсека:
- 6 270 мм
- Ширина пространства для загрузки:
- 2 470 мм
- Высота грузового отсека:
- 400 мм
Детали предложения
- Код объявления:
- A144-06-196
- Референс-номер:
- 61581
- Обновление:
- в последний раз 19.02.2026
Описание
ETÜ-TA-R 14.4
----Braking system:
* EBS electronic braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Tow bar / Flange eye:
* Tow bar height-adjustable by 300 mm
* Tow bar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* RDÜ (tyre pressure monitoring system)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General attachments:
* Jost landing gear front
* Externally mounted, hot-dip galvanized folding supports at rear
* Plastic toolbox, front right, mounted on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Fittings in front of bulkhead for retrofitting container locks
* Bolted flat sheet steel bulkhead
* Drop sides made of trapezoidal-profiled steel sheet, folding with drop side lifting springs
* Rear steel wall retractable between ramp holders, stowable in front of bulkhead when not in use
* Bolted rear stanchions
* Rear drive-on slope approx. 860 mm
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various drillings for 1.2 t lashing points in front bulkhead and rear end crossmember
----Ramps:
* One-piece, mechanical mesh ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as tow bar, bulkhead, tailgate, and access ramps
* Sideboard colour in RAL 9010 pure white
* Painting of side walls in alternative RAL colours available at extra cost
----Info:
* --Reinforced and certified body built according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer’s warranty
Nkedpfxoq Dyvyj Agmjw
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex Egestorf
Объявление было переведено автоматически. Возможны ошибки перевода.
----Braking system:
* EBS electronic braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Tow bar / Flange eye:
* Tow bar height-adjustable by 300 mm
* Tow bar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* RDÜ (tyre pressure monitoring system)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General attachments:
* Jost landing gear front
* Externally mounted, hot-dip galvanized folding supports at rear
* Plastic toolbox, front right, mounted on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Fittings in front of bulkhead for retrofitting container locks
* Bolted flat sheet steel bulkhead
* Drop sides made of trapezoidal-profiled steel sheet, folding with drop side lifting springs
* Rear steel wall retractable between ramp holders, stowable in front of bulkhead when not in use
* Bolted rear stanchions
* Rear drive-on slope approx. 860 mm
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various drillings for 1.2 t lashing points in front bulkhead and rear end crossmember
----Ramps:
* One-piece, mechanical mesh ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as tow bar, bulkhead, tailgate, and access ramps
* Sideboard colour in RAL 9010 pure white
* Painting of side walls in alternative RAL colours available at extra cost
----Info:
* --Reinforced and certified body built according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer’s warranty
Nkedpfxoq Dyvyj Agmjw
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex Egestorf
Объявление было переведено автоматически. Возможны ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2001
180 Объявления онлайн
Отправить запрос
Телефон & Факс
+49 40 33... объявления
Эти объявления также могут вас заинтересовать.
Малое объявление
Egestorf
5 270 km
Низкорамный прицеп
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Малое объявление
Nürnberg
5 547 km
3-сторонний самосвал
HumbaurHTK 185024 UNIVERSAL DREISEITENKIPPER
HumbaurHTK 185024 UNIVERSAL DREISEITENKIPPER
Ваше объявление было успешно удалено
Произошла ошибка





































































