Низкорамный прицепMÜLLER-MITTELTAL
14,4 to. Tiefl. , luftgefedert - Einschubrampen
Низкорамный прицеп
MÜLLER-MITTELTAL
14,4 to. Tiefl. , luftgefedert - Einschubrampen
Фиксированная цена без учета НДС
32 950 €
(39 210 € брутто)
Год выпуска
2025
Состояние
Новый
Местоположение
Egestorf 

Показать изображения
Показать карту
Базовые данные
Цена и местонахождение
Фиксированная цена без учета НДС
32 950 €
(39 210 € брутто)
- Местонахождение продавца:
- Eichenstich 12, 21272 Egestorf, Германия

Звонок
Технические детали
- Максимальная грузоподъёмность:
- 10 360 кг
- Общий вес:
- 14 400 кг
- Конфигурация осей:
- 2 оси
- Длина грузового отсека:
- 6 270 мм
- Ширина пространства для загрузки:
- 2 470 мм
- Высота грузового отсека:
- 400 мм
Детали предложения
- Код объявления:
- A116-45-309
- Справочный номер:
- 6159
- Последнее обновление:
- в 05.02.2026
Описание
* ETÜ-TA-ER 14.4:
Bodpfxendpn Ss Af Tjcw
----Brakes:
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering function
----Drawbar / Flange Towing Eye:
* Drawbar height adjustable by 300 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required
* LED lighting system
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized, folding rear supports
* Plastic toolbox mounted on the front right exterior of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Pre-installed fittings for later mounting of 20" container locks front and rear
* Bolted smooth sheet steel front wall
* Trapezoidal profile steel sheet side walls, foldable with drop side spring assist
* Bolted, hot-dip galvanized rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall and rear wall
* Complete vehicle hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Subject to alteration and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
Bodpfxendpn Ss Af Tjcw
----Brakes:
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering function
----Drawbar / Flange Towing Eye:
* Drawbar height adjustable by 300 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required
* LED lighting system
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized, folding rear supports
* Plastic toolbox mounted on the front right exterior of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Pre-installed fittings for later mounting of 20" container locks front and rear
* Bolted smooth sheet steel front wall
* Trapezoidal profile steel sheet side walls, foldable with drop side spring assist
* Bolted, hot-dip galvanized rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall and rear wall
* Complete vehicle hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Subject to alteration and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2001
Отправить заявку
Телефон & Факс
+49 40 33... объявления
Вам могут быть интересны и еще и эти объявления.
Ваше объявление было успешно удалено
Произошла ошибка









































































