Низкорамный прицепMÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Низкорамный прицеп
MÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Фиксированная цена без учета НДС
28 500 €
(33 915 € брутто)
Год выпуска
2024
Состояние
Новый
Местоположение
Egestorf 

Показать изображения
Показать карту
Базовые данные
Цена и местонахождение
Фиксированная цена без учета НДС
28 500 €
(33 915 € брутто)
- Местонахождение продавца:
- Eichenstich 12, 21272 Egestorf, Германия

Звонок
Технические детали
- Максимальная грузоподъёмность:
- 8 620 кг
- Общий вес:
- 11 900 кг
- Конфигурация осей:
- 2 оси
- Длина грузового отсека:
- 5 500 мм
- Ширина пространства для загрузки:
- 2 420 мм
- Высота грузового отсека:
- 500 мм
Детали предложения
- Код объявления:
- A112-18-097
- Справочный номер:
- 58921
- Последнее обновление:
- в 13.01.2026
Описание
* KA-TA-R 11.9:
----Brakes:
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Eye:
* Height-adjustable (up to 300 mm) hot-dip galvanized drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED rear lights
----General Attachments:
* Jost mechanical landing gear at the front
* Two mechanical hot-dip galvanized folding supports at the rear
* Galvanized steel toolbox, right-hand side
* Hot-dip galvanized bolted underrun protection
* Galvanized steel toolbox, right-hand side
* Plastic quarter mudguards
----Tipper Body:
* Mesh hooks on the sides and rear at the central locking mounts plus 3 at the front wall
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper body
* Continuous drop sides, foldable without centre stanchions, with drop side spring assist
* Foldable and swinging tailgate via manual central locking
* Hot-dip galvanized, bolted rear stanchions
* 4 mm steel floor plate
* Preparation for subsequent fitting of side extensions
* 5.5 meter long body
----Load Securing:
* One 5 t lashing ring at each corner
* Plus four 3 t recessed lashing rings per side in the outer frame
----Ramps:
* Rear mounting rail for approach ramps
* One pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Rear lockable storage compartment recessed under body in chassis
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Tipper body painted in RAL 9010 pure white
* Painting of side walls and tipper body in any RAL color available for additional cost
----Information:
Pgedpfx Afom Angvscjg
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf on the A7
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
----Brakes:
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Eye:
* Height-adjustable (up to 300 mm) hot-dip galvanized drawbar with 40 mm flanged towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED rear lights
----General Attachments:
* Jost mechanical landing gear at the front
* Two mechanical hot-dip galvanized folding supports at the rear
* Galvanized steel toolbox, right-hand side
* Hot-dip galvanized bolted underrun protection
* Galvanized steel toolbox, right-hand side
* Plastic quarter mudguards
----Tipper Body:
* Mesh hooks on the sides and rear at the central locking mounts plus 3 at the front wall
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper body
* Continuous drop sides, foldable without centre stanchions, with drop side spring assist
* Foldable and swinging tailgate via manual central locking
* Hot-dip galvanized, bolted rear stanchions
* 4 mm steel floor plate
* Preparation for subsequent fitting of side extensions
* 5.5 meter long body
----Load Securing:
* One 5 t lashing ring at each corner
* Plus four 3 t recessed lashing rings per side in the outer frame
----Ramps:
* Rear mounting rail for approach ramps
* One pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Rear lockable storage compartment recessed under body in chassis
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Tipper body painted in RAL 9010 pure white
* Painting of side walls and tipper body in any RAL color available for additional cost
----Information:
Pgedpfx Afom Angvscjg
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf on the A7
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2001
Отправить заявку
Телефон & Факс
+49 40 33... объявления
Вам могут быть интересны и еще и эти объявления.
Ваше объявление было успешно удалено
Произошла ошибка




















































