Прицеп с рабочей платформой

MÜLLER-MITTELTAL 21 to luftgef. Tandemtieflader mit Auffahrrampen

ETÜ-TA-R 21.0:

----Brakes:

* Wabco EBS-E (electronic braking system)
* Emergency release system for spring brake cylinders
* Drum brakes
----Axle:

* 2 x 11 ton Gigant axles

----Suspension:

* Air suspension with lifting and lowering system

----Drawbar / Flange coupling:

* Drawbar with 50 mm flange coupling and height-adjustable drawbar

----Lighting / Electrical System:

* 15-pin power connector
* LED lights 12/24 V
* TPMS (Tire Pressure Monitoring System)

----General Components:

* Jost support leg at the front
* Outboard folding supports at the rear
* Plastic tool box approx. 750 x 350 x 300 mm on the right side
Dcsdpfx Ael Tihxjiyek
* Side underrun protection
* Plastic quarter fenders

----Low-Loader Platform:

* In front of the headboard and rear slope, provision for retrofitting container locking mechanisms for transporting 20" containers
* Design for 21 tons GVW with reinforced frame and reinforced axles
* Reinforcement package for drilling rig transport on the chassis
* 50 mm hardwood floor in a clamped design
* In front of the headboard, provision for retrofitting container locking mechanisms
* Bolted headboard made of smooth sheet metal
* Divided side walls made of steel sheet - trapezoid profile - foldable with folding mechanism in the middle
* Steel rear wall can be slid between the ramps - bracket for storage when not in use inside in front of the headboard
* Rear supports bolted

----Load Securing:

* Perforated outer frame approx. 45 degrees angled, with 2 tons lashing force every 480 mm
* Installation of 3 tons tie-down brackets every 600 mm possible
* Profifix lashing rail in the longitudinal axis in the middle for lashing up to LC 3000 daN
* In the corners at the front and rear, 1 x 10 tons lashing each
* Lasi package with 2 x 8 tons lashing points each on the sides, recessed in the outer frame, various holes in the front and end beams for 1.2 tons lashing

----Ramps:

* One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 3,000 x 620 mm (can be moved together to 20 mm)
* Approach slope at the rear approx. 860 mm chassis

----Loading Heights:

* Unloaded approx. 940 mm
* Loaded approx. 910 mm

----Wheelbase / Tires:

* 1,810 mm
* Tires: 235/75R17.5

----Paint:

* Painting of the side walls in RAL - 9010 pure white
* Drawbar, headboard, rear flap, folding supports and ramps hot-dip galvanized
* Axles, springs, air tanks and support leg painted in a black tone

----Information:

* New vehicle with manufacturer's warranty
* Errors and prior sale excepted

----Delivery Time:

* Available immediately from Egestorf

Объявление было переведено автоматически. Возможны ошибки перевода.