Низкорамный прицепMÜLLER-MITTELTAL
14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Низкорамный прицеп
MÜLLER-MITTELTAL
14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Фиксированная цена без учета НДС
28 500 €
(33 915 € брутто)
Год выпуска
2026
Состояние
Новый
Местонахождение
Egestorf 

Базовые данные
Цена и местонахождение
Фиксированная цена без учета НДС
28 500 €
(33 915 € брутто)
- Местонахождение продавца:
- Eichenstich 12, 21272 Egestorf, Германия

Позвонить
Технические детали
Размеры и вес
Общий вес:
14 400 кг
Максимальная грузоподъёмность:
10 900 кг
Длина грузового отсека:
5 000 мм
Ширина пространства для загрузки:
2 420 мм
Высота грузового отсека:
500 мм
Оси и колёса
Конфигурация осей:
2 оси
Детали предложения
- Код объявления:
- A104-27-096
- Референс-номер:
- 57761
- Обновление:
- в последний раз 16.07.2026
Описание
* KA-TA-R 14.4
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 tons Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling
----General components:
* Jost mechanical landing gear at the front
Predpfx Asl Th A Ejhtjb
* 2 mechanical, hot-dip galvanized folding supports at the rear
* Hot-dip galvanized bolted underrun protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fenders
* 2-step step on the left side as an aid for getting on
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* 15-pole power connector
* LED tail lights
----Tipping bridge:
* Steel, 3-sided tipping body
* Continuous side walls at the top with internal tube reinforcement - without center posts - foldable with side wall spring supports
* Foldable and pivoting tailgate via manual central locking
* Hot-dip galvanized bolted rear posts
* 4 mm fine-grained steel floor
* Lashing hooks, receiving rail at the rear for loading ramps
* Preparation for later retrofitting of side wall extensions
----Chassis:
* Hot-dip galvanized chassis
----Load securing:
* 1 x 5 tons lashing point in each corner and 4 x 3 tons lashing eyes on each side, embedded in the outer frame
----ALU loading ramps:
* 1 pair of ALU loading ramps approx. 3,570 x 400 mm (load capacity 8 tons / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment at the rear below the loading area, embedded in the chassis
----Tires:
* Tires 385/55 R 22.5
----Painting:
* The axles, springs, air tanks and landing gear are painted in a black tone.
* Chassis, drawbar, floor, front panel, folding supports are hot-dip galvanized.
* Painting of the side walls in RAL 9010 pure white.
* Painting of the side walls in an RAL color against surcharge possible.
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle without initial registration with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available from approx. week 45/2026
Объявление было переведено автоматически. Возможны ошибки перевода.
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 tons Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling
----General components:
* Jost mechanical landing gear at the front
Predpfx Asl Th A Ejhtjb
* 2 mechanical, hot-dip galvanized folding supports at the rear
* Hot-dip galvanized bolted underrun protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fenders
* 2-step step on the left side as an aid for getting on
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* 15-pole power connector
* LED tail lights
----Tipping bridge:
* Steel, 3-sided tipping body
* Continuous side walls at the top with internal tube reinforcement - without center posts - foldable with side wall spring supports
* Foldable and pivoting tailgate via manual central locking
* Hot-dip galvanized bolted rear posts
* 4 mm fine-grained steel floor
* Lashing hooks, receiving rail at the rear for loading ramps
* Preparation for later retrofitting of side wall extensions
----Chassis:
* Hot-dip galvanized chassis
----Load securing:
* 1 x 5 tons lashing point in each corner and 4 x 3 tons lashing eyes on each side, embedded in the outer frame
----ALU loading ramps:
* 1 pair of ALU loading ramps approx. 3,570 x 400 mm (load capacity 8 tons / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment at the rear below the loading area, embedded in the chassis
----Tires:
* Tires 385/55 R 22.5
----Painting:
* The axles, springs, air tanks and landing gear are painted in a black tone.
* Chassis, drawbar, floor, front panel, folding supports are hot-dip galvanized.
* Painting of the side walls in RAL 9010 pure white.
* Painting of the side walls in an RAL color against surcharge possible.
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle without initial registration with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available from approx. week 45/2026
Объявление было переведено автоматически. Возможны ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2001
172 Объявления онлайн
Отправить запрос
Телефон & Факс
+49 40 33... объявления
Эти объявления также могут вас заинтересовать.
Успешно
Ваше сообщение было отправлено.
Малое объявление
Egestorf
5 270 km
Трёхсторонний самосвальный прицеп
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Успешно
Ваше сообщение было отправлено.
Малое объявление
Triptis
5 399 km
3-сторонний самосвал
FlieglTLK 118
FlieglTLK 118
Ваше объявление было успешно удалено
Произошла ошибка




























































