Низкорамный прицеп

MÜLLER-MITTELTAL 11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen

* KA-TA-R 11.9 "Masterline"

----Brakes:

* EBS brake system
* Emergency release device for spring brake cylinders
Nsdpjl Thymofx Ah Uswr
* Drum brakes

----Axles:

* 2 x 5.5 ton BPW axles

----Suspension:

* Parabolic springs with tandem equalizer unit

----Drawbar / Flange Eye:

* Drawbar height-adjustable by approx. 300 mm with 40 mm flanged towing eye

----General Attachments:

* Jost mechanical support winch at front
* Two mechanical, hot-dip galvanized folding support legs at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Bolted underride guard
* Plastic quarter fenders

----Electrics / Lighting:

* 15-pin power connector
* LED lighting
* TPMS (Tire Pressure Monitoring System)

----Tipper Bed:

* Net hooks on the sides and rear, fitted to the central locking bearings, plus 2 on the front bulkhead
* Steel pallet 3-way tipper body (continuous sidewalls - without center stanchions - foldable with drop-side spring assist)
* Rear stanchions bolted
* Steel combination swing doors at the rear, asymmetrically split, 2-leaf, can be swung and locked to 270°, not foldable – also equipped with additional swinging frame for automatic tailgate opening during tipping. Locking via galvanized rotary bar lock and central locking system
* Deactivation function for automatic tailgate during rear tipping with open swing door
* 4 mm steel floor plate
* Mounting rails at the rear for loading ramps

----Load Securing:

* One 5 ton lashing point in each corner
* Four 3 ton lashing rings recessed into the outer frame on each side

----Ramps:

* One pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons/pair), suitable for rubber-tired & tracked vehicles
* Lockable storage compartment under the load area, inset into the chassis, accessible from the rear

----Paintwork:

* Drawbar, front wall, tipper bed, rear stanchions, underride guard, mechanical support legs hot-dip galvanized
* Sidewalls and tailgate painted RAL 9010 pure white
* Other RAL shades for sidewalls available at extra cost
* Axles, springs, towing eye, air tanks, and support winch painted black

----Other Information:

* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer's warranty
* Subject to prior sale and errors

----Delivery Time:

* Immediately available from Egestorf on the A7

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.