Низкорамный прицепMÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Низкорамный прицеп
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Фиксированная цена без учета НДС
27 900 €
(33 201 € брутто)
Год выпуска
2025
Состояние
Новый
Местоположение
Egestorf 

Показать изображения
Показать карту
Базовые данные
Цена и местонахождение
Фиксированная цена без учета НДС
27 900 €
(33 201 € брутто)
- Местонахождение продавца:
- Eichenstich 12, 21272 Egestorf, Германия

Звонок
Технические детали
- Максимальная грузоподъёмность:
- 8 650 кг
- Общий вес:
- 11 900 кг
- Конфигурация осей:
- 2 оси
- Длина грузового отсека:
- 5 000 мм
- Ширина пространства для загрузки:
- 2 420 мм
- Высота грузового отсека:
- 500 мм
Детали предложения
- Код объявления:
- A104-26-970
- Справочный номер:
- 61561
- Последнее обновление:
- в 19.12.2025
Описание
* KA-TA-R 11.9 Masterline
----Brakes:
* Wabco EBS
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalization aggregate
----Drawbar / Coupling Eye:
* Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange coupling eye
----Electrics / Lighting:
Pjdpfx Afel Thw Iecepl
* RDÜ Tyre Pressure Monitoring System
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED tail lights
----General Attachments:
* Mechanical landing gear at the front
* 2 mechanical folding supports at the rear
* Right-side plastic tool box
* Two-step entry on the front left (in direction of travel)
* Bolted underride guard
* Plastic quarter mudguards
----Tipping Platform:
* Net hooks on the sides and rear in the central locking bearings and 2 at the front wall
* Steel pallet three-way tipper body (continuous side walls - without intermediate stanchions - foldable with board-side spring assist, tailgate foldable and swinging via manual central locking)
* 4 mm steel floor plate
* Rear ramp holder rail
----Load Security:
* Each corner equipped with 1 x 5 t lashing ring
* 4 x 3 t recessed lashing rings per side in the outer frame
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment at the rear of the chassis, under the loading platform
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipping body, front wall, side panels, folding supports, and rear stanchions hot-dip galvanized. Axles, springs, air tanks, flange coupling eye, and landing gear painted in black. Side panels hot-dip galvanized.
----Notes:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery Time:
* Immediately available from Egestorf
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
----Brakes:
* Wabco EBS
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalization aggregate
----Drawbar / Coupling Eye:
* Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange coupling eye
----Electrics / Lighting:
Pjdpfx Afel Thw Iecepl
* RDÜ Tyre Pressure Monitoring System
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED tail lights
----General Attachments:
* Mechanical landing gear at the front
* 2 mechanical folding supports at the rear
* Right-side plastic tool box
* Two-step entry on the front left (in direction of travel)
* Bolted underride guard
* Plastic quarter mudguards
----Tipping Platform:
* Net hooks on the sides and rear in the central locking bearings and 2 at the front wall
* Steel pallet three-way tipper body (continuous side walls - without intermediate stanchions - foldable with board-side spring assist, tailgate foldable and swinging via manual central locking)
* 4 mm steel floor plate
* Rear ramp holder rail
----Load Security:
* Each corner equipped with 1 x 5 t lashing ring
* 4 x 3 t recessed lashing rings per side in the outer frame
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment at the rear of the chassis, under the loading platform
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipping body, front wall, side panels, folding supports, and rear stanchions hot-dip galvanized. Axles, springs, air tanks, flange coupling eye, and landing gear painted in black. Side panels hot-dip galvanized.
----Notes:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery Time:
* Immediately available from Egestorf
Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.
Поставщик
Примечание: Зарегистрируйтесь бесплатно или войдите в систему, чтобы получить доступ ко всей информации.
Регистрация: 2001
Отправить заявку
Телефон & Факс
+49 40 33... объявления
Вам могут быть интересны и еще и эти объявления.
Ваше объявление было успешно удалено
Произошла ошибка





























































